Construction Of Portable Wheel-Barrow
Complete Construction Of Portable Wheel-Barrow Project Materials (Chapters 1 to 5):
After detailed study on machines and levers, the construction work started as follows:-
Making out, pattern development, cutting filling, drilling, machining, assembling, welding and finishing. Detailed procedures carried out is located at the sequence of operation in subsequent pages.
The machine has scale of 1:5 in all parts of its dimensions. However, brief dimensions are given below:-
Upper surface of bowl – 850mm
Inner surface of bowl – 335mm
Stand height – 325mm
Diameter of wheel – 250mm
Diameter of shaft seating and the shaft 4mm
Thickness of type – 75mm
The drawing of the project was done and enclosed at the end page of this booklet. At last, a 150kg capacity of conveying machine was constructed.
Title pages
Title page
Approval page
Dedication page
Acknowledgment page
Abstract
CHAPTER ONE
Introduction
Historical background
1.2 Need for constructing the machine
CHAPTER TWO
THEORY/LITERATURE SURVEY
2.1 Types of load to be carried by the conveyor
2.2 Operation of the wheel-barrow
CHAPTER THREE
3.1 Equipments/tools employed during construction of the wheel-barrow
3.2 Materials of construction
3.3 Construction procedure
3.4 Sequence of operation
3.5 Design calculations
3.6 Calculations basic on the bowl
3.7 Specifications
3.8 Project drawing
CHAPTER FOUR
COSTING OF PORTABLE WHEEL-BARROW
4.1 Material cost analysis
4.2 Labour cost analysis
4.3 Miscellaneous costs
Total cost
CHAPTER FIVE
5.1 Discussion
5.2 Precautions taken during construction
5.3 Cautions to users
5.4 Recommendations
5.5 Conclusions
References
INTRODUCTION
HISTORICAL BACKGROUND
Few centuries ago, the task of conveying loads around was so cumbersome. Very minor loads could be carried from one point of the other. The distances covered during the period of weak was less whereas the time expended on the short covered distance were much. Also, there were no appreciable accomplishment of words, there were continually loss of man-power as much effort and energy was spent on conveying loads.
Loads were carried on human heads which was generally unsafe.
Consequent upon these limitations, man started devising means on how loads could be carried from one point to another with ease. Before 13trh century, wheel-barrow was first constructed in china. The type of wheel-barrow then had its wheel under the cargo box. This conveyor helped the Chinese then to execute most of their works. But, yet, smaller quantity barrow due to the weak mechanical strength of material for continuation.
In 13th century proper an improvement on the type of wheel-barrow that were in China was constructed and used in Europe. This type had its wheel at the front of the machine on like that of the Chinese which had its wheel at the back of the cargo. These conveyors in those days could only convey less loads and could withstand less stress due to the deficiencies in the strength of the materials used for construction.
But, as time went on, there was and have been improvement and advancement in technology and there is how knowledge on how mechanical strength of construction materials can be improved thus, guaranteeing capability of machines to the function they are intended for.
1.2 NEED FOR CONSTRUCTING THE MACHINE
The need of constructing this machine conveyor, arose as a result of difficulty being encountered daily on carrying of loads from points to points. By the construction of this conveyor, loss of man-power, money, time and difficulties encountered during load conveying is reduced.
To establish a convincing fact in terms of technological acquired knowledge.
To contribute to technological advancement of the society.
To leave a legacy for the upcoming and prospective Engeers.
The introduction of Construction Of Portable Wheel-Barrow should start with the relevant background information of the study, clearly define the specific problem that it addresses, outline the main object, discuss the scope and any limitation that may affect the outcome of your findings
Literature Review of Construction Of Portable Wheel-Barrow should start with an overview of existing research, theoretical framework and identify any gaps in the existing literature and explain how it will address the gaps
Methodology of Construction Of Portable Wheel-Barrow should describe the overall design of your project, detail the methods and tools used to collect data explain the techniques used to analyse the collected data and discuss any ethical issues related to your project
Results should include presentation of findings and interpretation of results
The discussion section of Construction Of Portable Wheel-Barrow should Interpret the implications of your findings, address any limitations of your study and discuss the broader implications of your findings
The conclusion of Construction Of Portable Wheel-Barrow should include summarize the main results and conclusions of your project, provide recommendations based on your findings and offer any concluding remarks on the project.
References should List all the sources cited in Construction Of Portable Wheel-Barrow project by following the required citation style (e.g., APA, MLA, Chicago).
The appendices section should Include any additional materials that support your project (Construction Of Portable Wheel-Barrow) but are too detailed for the main chapters such as raw data, detailed calculations etc.