Construction Of Two Feet Electronics Fluorescent Lamp
(A Case Of Institute Of Management And Technology (Imt) Enugu States)
Complete Construction Of Two Feet Electronics Fluorescent Lamp Project Materials (Chapters 1 to 5):
Engineering being the mother every technology cannot be neglected. Without practical application in the field of engineering. The student and their tutors are impotent. The incrative nature of engineering depends on the technical know-how of the engineer.
The purpose of practical project to students is to help them acquire practical knowledge in their choosing area of specification. It helps them to have a foretaste of the real world.
This report is a comprehensive report on the practices project I did. Precisely, with adequate knowledge and preparation, the student will celebrate victory from time to time.
Onyechi Ifeoma .M.
November, 2007.
Title Page
Dedication
Acknowledgement
Preface
Table Of Content
Abstract
Chapter One
1.0 Introduction
Chapter Two
2.0 Literature Review
2.1 Component Description
2.2 Capacitor
2.2.1 Characteristic Of Capacitors
2.3 Resistor
2.4 Transformer
2.5 Transistor
2.6 Diode
Chapter Three
3.0 Principle Of Operation
3.1 Block Diagram
3.2 Circuit Diagram
3.3 Wiring Diagram
Chapter Four
4.0 Construction
4.1 How The Construction Was Made
4.2 Construction Of The Chassis (Casing)
4.3 Flat Pattern Drawing Of The Chassis
4.4 Tools Used During Construction
Chapter Five
5.0 Testing & Result
Chapter Six
6.0 Recommendation And Conclusion
6.1 Recommendation
6.2 Conclusion
Reference
Title Page
Dedication
Acknowledgement
Preface
Table Of Content
Abstract
Chapter One
1.0 Introduction
Chapter Two
2.0 Literature Review
2.1 Component Description
2.2 Capacitor
2.2.1 Characteristic Of Capacitors
2.3 Resistor
2.4 Transformer
2.5 Transistor
2.6 Diode
Chapter Three
3.0 Principle Of Operation
3.1 Block Diagram
3.2 Circuit Diagram
3.3 Wiring Diagram
Chapter Four
4.0 Construction
4.1 How The Construction Was Made
4.2 Construction Of The Chassis (Casing)
4.3 Flat Pattern Drawing Of The Chassis
4.4 Tools Used During Construction
Chapter Five
5.0 Testing & Result
Chapter Six
6.0 Recommendation And Conclusion
6.1 Recommendation
6.2 Conclusion
Reference
The introduction of Construction Of Two Feet Electronics Fluorescent Lamp should start with the relevant background information of the study, clearly define the specific problem that it addresses, outline the main object, discuss the scope and any limitation that may affect the outcome of your findings
Literature Review of Construction Of Two Feet Electronics Fluorescent Lamp should start with an overview of existing research, theoretical framework and identify any gaps in the existing literature and explain how it will address the gaps
Methodology of Construction Of Two Feet Electronics Fluorescent Lamp should describe the overall design of your project, detail the methods and tools used to collect data explain the techniques used to analyse the collected data and discuss any ethical issues related to your project
Results should include presentation of findings and interpretation of results
The discussion section of Construction Of Two Feet Electronics Fluorescent Lamp should Interpret the implications of your findings, address any limitations of your study and discuss the broader implications of your findings
The conclusion of Construction Of Two Feet Electronics Fluorescent Lamp should include summarize the main results and conclusions of your project, provide recommendations based on your findings and offer any concluding remarks on the project.
References should List all the sources cited in Construction Of Two Feet Electronics Fluorescent Lamp project by following the required citation style (e.g., APA, MLA, Chicago).
The appendices section should Include any additional materials that support your project (Construction Of Two Feet Electronics Fluorescent Lamp) but are too detailed for the main chapters such as raw data, detailed calculations etc.