Home » Project Material » Design And Construction Of A 3 Way Inter Communication System

Design And Construction Of A 3 Way Inter Communication System

6 Chapters
|
43 Pages
|
5,491 Words
|
Electrical Electronics Engineering

Complete Design And Construction Of A 3 Way Inter Communication System Project Materials (Chapters 1 to 5):

ABSTRACT

An intercommunication system is nothing but the communication between two or more persons not close to one another. This does not mean we should categorize telephones, fax, teleprinters, telegraphs etc. an example of intercom system sine they are used in communication between people. Infact, intercom involves short distance places. It is limited in electronics, offices, and hospitals.
The intercom system under is a three way station type. This means that a person can communicate to the other at another station at his own convenient time. They call once another attention by the use of the tone generated by the use of tone generator.
Depress a button and the tone sounds, and the same switch is thrown to the intercom circuit thus they communicate.
This system to be used in solving the problem of poor communication in our department. Besides, it can be extended to some other offices by the addition this one may use a rotary switch

TABLE OF CONTENT

Title Page
Certification
Dedication
Acknowledgement
Abstract
Table Of Contents

 

Chapter One
1.0 Introduction

Chapter Two
2.0 Complete Circuit Description

2.1 Simplified Block Diagram Of Thee 3-Way Intercom System
2.2 Operation Principles

Chapter Three
3.0 Icc1212c

3.1 Resistor
3.2 Capacitor
3.3 Condenser Microphone
3.4 Loudspeakers
3.5 Switches
3.6 Communication Cables

Chapter Four
4.0 Circuitry Design And Description

4.1 Description Of Power Supply Unit Circuit
4.2 Description Of The Tone Generator Circuit
4.3 Circuit Diagram Of The Three Units And Explanation
4.4 Explanation Of The Switching Circuit

Chapter Five
5.0 Construction And Packaging

5.01 Component Sourcing
5.1 Construction And Testing
5.2 Audio Amplifying Stage
5.3 Prototype
5.4 Trouble Shooting
5.5 Packaging

Chapter Six
6.0 Conclusion

6.1 Further Study And Design
Reference
Appendix

CHAPTER ONE

1.0 INTRODUCTION
Electronic inter communication is the process of exchanging information between individuals over relatively long distance by the use of electronic system connected together by communication cables or the instrument cable or satellite links. A telephone system and an intercom system can be used to achieve intercommunication.
In the department of Electrical/Electronics Engineering, Institute of Management and Technology, Enugu, there exists the need for intercommunication between all the offices in the department so as to enable the smooth running of activities. Where by information and ideas are exchanged between the individuals concerned just at the press of a button. To achieve this kind of situation and economical means of electronic communication was considered.
Thus the intercom system was chosen so as interconnect the three offices earlier specified. Other offices can also be attached/ connected to the system as time goes on since thee is room for modification. One may ask why the telephone system not considered since it is also another system of intercommunication. The telephone system is equally better but less appropriate since it requires a dedicated line form NITEL who charges bills accordingly. The intercom system only makes use of the physical communication cables interlinking the handsets concerned. Also, the telephone system requires PABX system (Private Automatic Box Exchange) for effective communication between the concerned telephone sets. The PABX is a high capacity telephone switching equipment that automatically connects a call to the desired route or extension number. It equally handles both external call and internal call. The telephone set or system is more appropriate for a whole educational complex or
company. It is not appropriate to use the telephone for the connectivity of few offices as this under-utilizes the capacity of the PABX since they are designed to handle high capacity of lines. Bearing cost in mind, the 3-way intercom units is cheaper to construct when compared to the cost of procuring PABX system talkless of design and construction.
By embarking on the 3-way intercom, this believed that an efficient communication gadget or communication link between the offices shall be achieved.

You Might Like These:
Project Structure

The introduction of Design And Construction Of A 3 Way Inter Communication System should start with the relevant background information of the study, clearly define the specific problem that it addresses, outline the main object, discuss the scope and any limitation that may affect the outcome of your findings

Literature Review of Design And Construction Of A 3 Way Inter Communication System should start with an overview of existing research, theoretical framework and identify any gaps in the existing literature and explain how it will address the gaps

Methodology of Design And Construction Of A 3 Way Inter Communication System should describe the overall design of your project, detail the methods and tools used to collect data explain the techniques used to analyse the collected data and discuss any ethical issues related to your project

Results should include presentation of findings and interpretation of results

The discussion section of Design And Construction Of A 3 Way Inter Communication System should Interpret the implications of your findings, address any limitations of your study and discuss the broader implications of your findings

The conclusion of Design And Construction Of A 3 Way Inter Communication System should include summarize the main results and conclusions of your project, provide recommendations based on your findings and offer any concluding remarks on the project.

References should List all the sources cited in Design And Construction Of A 3 Way Inter Communication System project by following the required citation style (e.g., APA, MLA, Chicago).

The appendices section should Include any additional materials that support your project (Design And Construction Of A 3 Way Inter Communication System) but are too detailed for the main chapters such as raw data, detailed calculations etc.