Design And Construction Of An Intelligent 250 Volts Battery Charger With Micro Processor Using Seven Segment Display
Complete Design And Construction Of An Intelligent 250 Volts Battery Charger With Micro Processor Using Seven Segment Display Project Materials (Chapters 1 to 5):
Electronic Components require direct current (dc) for their effective operation. This direct current can be gotten either by rectifying an alternating current (ac) or Connecting the system to a direct current source which is usually a battery.
It is observed that after some period of operation, the batteries no longer function as expected. This may be as a result of degradation or discharge of the battery. This phenomenon has resulted in economic waste in the past, when only dry cells batteries were used.
In more recent times, engineers taught it wise to device a means of restoring a discharged battery back to life. This advancement brought into existence the invention of rechargeable batteries.
The focus of this work is on intelligent battery charger. This charger may monitor the voltage, temperature and/ or time under charge to give out an output as whether the battery is low or fully charged using seven segment displays
Title page
Certification page
Dedication
Acknowledgement
Abstract
Table of content
CHAPTER ONE
Introduction
What is Battery Charger
What is an Intelligent Battery Charger
Other Types of Battery Charger
CHAPTER TWO
Literature Review
CHAPTER THREE
Component Description
Micro Controller
Resistor
Transistor
Seven Segment Display
Capacitor
Transformer
Diode
CHAPTER FOUR
Principle of Operation
Circuit Diagram
Component List
CHAPTER FIVE
Conclusion
Recommendations
References
INTRODUCTION
WHAT IS A BATTERY CHARGER: A battery charger is a device used to put energy into a secondary cell or rechargeable battery. By forcing on electric current through it.
The charge current depends upon the technology and capacity of the battery being charged. For example, the current that should be applied to recharge a 12v car battery will be very different from the current for a mobile phone battery.
WHAT IS AN INTELLIGENT BATTERY CHARGER: This is a battery charger whose output current depends upon the battery’s state. An intelligent charger may monitor the battery’s voltage, temperature and/ or time under charge to determine the optimum charge current at that instant. Charging is terminated when a combination of the voltage, temperature and/or time indicates that the battery is fully charged.
OTHER TYPE OF BATTERY CHARGERS
- SIMPLE BATTERY CHARGER: A simple charger works by connecting a constant dc power source to the battery being charged. A simple charger does not alter its output based on time or the charge on the battery. This simplicity means that a simple charger is inexpensive but there is a trade off in quality.
- TRICKLE BATTERY CHARGER: A trickle charger is a kind of simple charger that charges the battery slowly, at the self-discharge rate. A trickle charger is the slowest kind of battery charger.
- TIMER-BASED BATTERY CHARGER: The output of timer charger is terminated after a predetermined time. Timer chargers were the most common type for high-capacity Ni-Cd cells in the late 1990s
- FAST BATTERY CHARGER: fast chargers make use of control circuitry in the batteries being charged to rapidly charge the batteries without damaging the cells element. Most such chargers have a cooling fan to help keep the temperature of the cells under control.
- PULSE BATTERY CHARGER: some charger use pulse technology in which a pulse is fed to the battery. This DC pulse has a strictly controlled rise time, pulse width, pulse repetitive rate (frequency) and amplitude. This technology is used to work with any size, voltage, capacity or chemistry of batteries including automotive and valve-regulated batteries. .
- INDUCTIVE BATTERY CHARGER: Inductive battery chargers use electromagnetic induction to charge batteries. A charging station sends electromagnetic energy through inductive coupling to an electrical device which stores the energy in the batteries
- USB-BASED BATTERY CHARGER: Since the universal serial bus specification provides for a five-volt power supply, it is possible to use a USB cable as a power source for recharging batteries.
The introduction of Design And Construction Of An Intelligent 250 Volts Battery Charger With Micro Processor Using Seven Segment Display should start with the relevant background information of the study, clearly define the specific problem that it addresses, outline the main object, discuss the scope and any limitation that may affect the outcome of your findings
Literature Review of Design And Construction Of An Intelligent 250 Volts Battery Charger With Micro Processor Using Seven Segment Display should start with an overview of existing research, theoretical framework and identify any gaps in the existing literature and explain how it will address the gaps
Methodology of Design And Construction Of An Intelligent 250 Volts Battery Charger With Micro Processor Using Seven Segment Display should describe the overall design of your project, detail the methods and tools used to collect data explain the techniques used to analyse the collected data and discuss any ethical issues related to your project
Results should include presentation of findings and interpretation of results
The discussion section of Design And Construction Of An Intelligent 250 Volts Battery Charger With Micro Processor Using Seven Segment Display should Interpret the implications of your findings, address any limitations of your study and discuss the broader implications of your findings
The conclusion of Design And Construction Of An Intelligent 250 Volts Battery Charger With Micro Processor Using Seven Segment Display should include summarize the main results and conclusions of your project, provide recommendations based on your findings and offer any concluding remarks on the project.
References should List all the sources cited in Design And Construction Of An Intelligent 250 Volts Battery Charger With Micro Processor Using Seven Segment Display project by following the required citation style (e.g., APA, MLA, Chicago).
The appendices section should Include any additional materials that support your project (Design And Construction Of An Intelligent 250 Volts Battery Charger With Micro Processor Using Seven Segment Display) but are too detailed for the main chapters such as raw data, detailed calculations etc.