Design And Development Of Home Intrusion And Burglary Detective Monitoring System
Complete Design And Development Of Home Intrusion And Burglary Detective Monitoring System Project Materials (Chapters 1 to 5):
The main objective of this project was to ensure a proper security to building against theft or intruder. An intrusion detection systems are an integral part of most physical security systems. This device is widely used to isolate and protect public and private places such as airports, military bases, power stations and security related applications. Fence structures merely prevent a percentage of intrusions or postpone them. A higher level of security needed to monitor and investigate activities on or around the university. The system used major components as Arduino board, ultrasonic sensor, and speaker/buzzer. The unauthorized person who tries to intrude the university would be sensed, detected and alarm would generate a signal that an intruder was trying to enter the university. The sound level depended on the distance, the nearer the intruder and stronger would be the alarm signal. This system was very useful for security applications. Ultrasonic sensor would be searching if there was a motion in its range.
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 PROBLEM STATEMENT
1.2 AIM/OBJECTIVE OF THE PROJECT
1.3 SIGNIFICANCE OF THE PROJECT
1.4 SCOPE OF THE PROJECT
1.5 LIMITATION OF THE PROJECT
1.6 APPLICATION OF THE PROJECT
1.7 PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
2.0 LITERATURE REVIEW
2.1 REVIEW OF THE PROJECT
2.2 HISTORICAL BACKGROUND OF INTRUDER ALARM
2.3 RELATED STUDIES
CHAPTER THREE
3.0 CONSTRUCTION METHODOLOGY
3.1 BLOCK DIAGRAM OF THE SYSTEM
3.2 CIRCUIT DIAGRAM
3.3 CIRCUIT DESCRIPTION
3.4 SYSTEM OPERATION
3.5 COMPONENTS LIST
3.6 DESCRIPTION OF MAJOR COMPONENTS USED
3.7 POWER SUPPLY
CHAPTER FOUR
4.0 RESULT ANALYSIS
4.1 CONSTRUCTION PROCEDURE AND TESTING
4.2 ASSEMBLING OF SECTIONS
4.3 CONSRUCTION OF THE CASING
4.4 TESTING
CHAPTER FIVE
5.1 CONCLUSIONS
5.2 RECOMMENDATION
5.3 REFERENCES
INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
The need for having home protection has always been there. But in the recent times, considering a dramatic rise in petty crimes like robbery and theft, the need has been more strongly felt to have a fool proof protection of the belongings and the family members. Home security has come a long way in the last few decades. It was in the hands of a guard who manually provided surveillance during nights in the earlier days, but it was not fool proof as it was only normal for him to have momentary lapse of concentration.
The guard was also susceptible to sleep at times. It was then that home alarm system based upon electronic circuits were developed which proved to be highly reliable and were appreciated by the people as they were relieved from constant monitoring of their homes [2].
1.2 PROBLEM STATEMENT
The need for having a constant home protection has always been there. But in the recent times, considering a dramatic rise in petty crimes like robbery and theft, the need has been more strongly felt to have a fool proof protection of the belongings and the family members. Home security has come a long way in the last few decades. It was in the hands of a guard who manually provided surveillance during nights in the earlier days, but it was not fool proof as it was only normal for him to have momentary lapse of concentration. This device brought solution to this need. It ensures adequate protection and monitoring against intruders.
1.3 AIM AND OBJECTIVES OF THE PROJECT
The main aim of this work is to build a home intrusion and burglary detective monitoring system using an arduino and GSM module.
i. To create a comfort in the minds of house owners when they out from their premises without much fear of intruder.
ii. To build a device that will alert the user when an intruder enters into the prohibited. If there is any obstacle close to PIR sensor, it generates an interrupt signal. This interrupt signal is given to the speaker to alert the user.
iii. To alert the user via an SMS whenever an intruder is detected
1.4 SIGNIFICANCE OF THE PROJECT
This device functions as an electronics watch dog. This device functions as a major security alarms used in residential, commercial, industrial, and military properties for protection against burglary (theft) or property damage, as well as personal protection against intruders.
1.5 PURPOSE OF THE PROJECT
This project proposes the development of security system for form houses and residential houses.
1.6 APPLICATION OF THE PROJECT
This device is used in the following places as:
• Home Security Systems.
• Prisons Security.
• Vehicle Security.
• School environment
• Broadband alarm monitoring.
• Glass Break.
• Property Theft Alarm
1.7 LIMITATION OF THE PROJECT
The problem with this device is that any living thing can trigger the alarm such as animals
1.8 PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to this study. In this chapter, the background, significance, objective limitation and problem of this study were discussed.
Chapter two is on literature review of the study. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
The introduction of Design And Development Of Home Intrusion And Burglary Detective Monitoring System should start with the relevant background information of the study, clearly define the specific problem that it addresses, outline the main object, discuss the scope and any limitation that may affect the outcome of your findings
Literature Review of Design And Development Of Home Intrusion And Burglary Detective Monitoring System should start with an overview of existing research, theoretical framework and identify any gaps in the existing literature and explain how it will address the gaps
Methodology of Design And Development Of Home Intrusion And Burglary Detective Monitoring System should describe the overall design of your project, detail the methods and tools used to collect data explain the techniques used to analyse the collected data and discuss any ethical issues related to your project
Results should include presentation of findings and interpretation of results
The discussion section of Design And Development Of Home Intrusion And Burglary Detective Monitoring System should Interpret the implications of your findings, address any limitations of your study and discuss the broader implications of your findings
The conclusion of Design And Development Of Home Intrusion And Burglary Detective Monitoring System should include summarize the main results and conclusions of your project, provide recommendations based on your findings and offer any concluding remarks on the project.
References should List all the sources cited in Design And Development Of Home Intrusion And Burglary Detective Monitoring System project by following the required citation style (e.g., APA, MLA, Chicago).
The appendices section should Include any additional materials that support your project (Design And Development Of Home Intrusion And Burglary Detective Monitoring System) but are too detailed for the main chapters such as raw data, detailed calculations etc.