Home » Project Material » Design And Implementation Of An Online Local Area Network (LAN) Knowledge-Based System

Design And Implementation Of An Online Local Area Network (LAN) Knowledge-Based System

7 Chapters
|
52 Pages
|
5,791 Words
|
Computer Engineering

Complete Design And Implementation Of An Online Local Area Network (LAN) Knowledge-Based System Project Materials (Chapters 1 to 5):

ABSTRACT

The project is designed specially for those hardware engineers/computer scientist who are just commerce their carries in the field of installation and maintenance of computer network. While the theories are meant for commercial applicant that are interested in using the programme technique.
Further more, in this project design, the principle of different type of network configuration are been highlighted. And emphasis are made on the installation and maintenance techniques. Finally, appropriate information are been acquired from human experts in the field of network.

TABLE OF CONTENT

TITLE PAGE
CERTIFICATION
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
ORGANIZATION OF THE WORK
TABLE OF CONTENT

CHAPTER ONE:
INTRODUCTION
1.1 STATEMENT OF PROBLEM
1.2 PURPOSE OF STUDY
1.3 AIMS AND OBJECTIVES
1.4 SCOPE AND PRELIMITATION
1.5 LIMITATIONS OR CONSTRAINTS
1.6 ASSUMPTIONS
1.7 DEFINITION OF TERMS

CHAPTER TWO
LITERATURE REVIEW
HIERARCHICAL TOPOLOGY
STAR TOPOLOGY
BUS TOPOLOGY
RING NETWORK
BNC CONNECTOR

CHAPTER THREE
3.0 DESCRIPTION AND ANALYSIS OF EXISTING SYSTEM
3.1 FACT FINDINGS METHOD USED
3.2 OBJECTIVES OF THE EXISTING SYSTEM
3.3 INOUT ANALYSIS
3.4 PROCESS ANALYSIS
3.5 OUTPUT ANALYSIS
3.6 PROBLEMS OF THE EXISTING SYSTEM
3.7 JUSTIFICATION OF THE NEW SYSTEM

CHAPTER FOUR
4.1 DESIGN OF THE NEW SYSTEM OUTPUT SPECIFICATION AND DESIGN
4.2 FILE DESIGN
4.3 PROCEDURE CHART
4.4 SYSTEM FLOW CHAR
4.5 SYSTEM REQUIREMENT

CHAPTER FIVE
5.1 IMPLEMENTATION
5.2 PROGRAM DESIGN
5.3 PROGRAM FLOW CHART
5.4 PSEUDO CODES
5.5 SOURCE PROGRAM
5.6 TEST RUN

CHAPTER SIX
DOCUMENTATION

CHAPTER SEVEN
7.1 RECOMMENDATION
7.2 CONCLUSION
APPENDICES/REFERENCE

CHAPTER ONE

INTRODUCTION
How is computer and other related devices actually able to send information across data communication lines. The answer to this is the installation and maintenance of computer network. Furthermore, installation and maintenance of computer network is the glue that holds all data in the exact form, the data is to be transfer from one place to another. While the procedures for installation of computer methods are embodies in this project.

STATEMENT OF THE PROBLEM
Computer hardware may fail, telephone line may fail and more likely, the computer software may have bugs that make the network stop working. How does the airlines clerk sell tickets when the computer is down? How can the pilot send a message across if the network fails? How do you get your electronic mail, pay bills, get news, if you become dependent on computer networks that sometimes fails. If you put a shaved database, you want to be sure that it will not disappear or be tampered with. It you can use home computer raid your account and toil will your money?
A company that puts all its important data in line runs the risk to go out of business if that information is boss or incorrect.
Furthermore, support the owners of a saved data based want only certain people to use it one way to limit use, is to give a password to those people alone, that will have access to it and before opening the data base, the computer will ask the user to enter a password.
Password protection is not parted, though if someone finds out your password and use it, the computer will not know that such password is been used illegally by such person.
Finally, inability of the computer scientist to observe appropriate procedure in connection during installation poses treat to them, which however may lead to damage of the computer and cards.

PURPOSE OF THE STUDY
The purpose of the study is to design a system which shall render an assistance to the computer scientist during the installation and maintenance of a compute network. Moreover, proper installation of various components of the networks are achieved and the prevention and corrective maintenance are properly added.

AIM AND OBJECTIVES
The aim and objectives of the study are as follows:
1. To minimize cost: With maintenance, there is reduction in cost, i.e. instead of spending more money in the purchasing of new equipment, the money can be used in the maintenance of the faulty equipment.
2. To reduce the staff: With the introduction of the computer network (computerized) there is possibility that the number of staff will reduce.
3. To share file and resources at a given time:- With the computer network or files and other peripherals can be shared at any given time as printer, scanner and files.
4. To increases output:- With the computer network; jobs that are scheduled for 10 day can be done in 3 days and this will increase output.
5. The overall objectives of the local area network:- Is to connect the computer system and devices in the same geographical area.

SCOPE OF THE STUDY
There are different kinds of computer network system, such as Local Area Network (LAN) and Wide Area Network (WAN) etc. But this project is limited to only Local Area Network (LAN) and using about 100 workstation.

LIMITATIONS
All area of human endeavours are usually characterized by some limits factors. But the peculiar constraint encountered in carrying out this project are as follows:
1. Constraint of time: The study was carried out with a given terminal data for submission due to the shortness in the semester.
2. Unavailability of language complier for use such as the c language. That would have enable the development of more sophisticated work.
3. Virus attack:- During programming design. There was virus attack, which indicated start from scratch.

ASSUMPTION
In the design of this project, it was assured that the computer scientist should have been conversant with the use of computer hardware system computer network system and the computer software system.

DEFINITION OF TERMS
Computer Network:- This is the process where by two or more computers are connected together so that they can communicate with each other at the same time share resources, files and other peripherals devices, like scanner and printer.
It a collection of computers (PCS) and other devices connected together with cable (Cats) and RJ45 plus. This allows than to communicate with each opther and other to exchange, preserve and protect information, and it also make it easier to share expensive hardware/printer, scanner, and CDROM and software’s.
Installation:- Installation is the process whereby a device apparatus, or piece of machinery is fixed of fitted in a place to perform some specific functions.
Maintenance:- This is the performance if present maintenance in the aid to prevent incipient hardware faults or to correct hardware faults that has occurred.
Expert System:- Is a computer program which solve problems from a specific knowledge base, that is a body of knowledge in a specialized field.

 

You Might Like These:

No other related project topic on this website

Project Structure

The introduction of Design And Implementation Of An Online Local Area Network (LAN) Knowledge-Based System should start with the relevant background information of the study, clearly define the specific problem that it addresses, outline the main object, discuss the scope and any limitation that may affect the outcome of your findings

Literature Review of Design And Implementation Of An Online Local Area Network (LAN) Knowledge-Based System should start with an overview of existing research, theoretical framework and identify any gaps in the existing literature and explain how it will address the gaps

Methodology of Design And Implementation Of An Online Local Area Network (LAN) Knowledge-Based System should describe the overall design of your project, detail the methods and tools used to collect data explain the techniques used to analyse the collected data and discuss any ethical issues related to your project

Results should include presentation of findings and interpretation of results

The discussion section of Design And Implementation Of An Online Local Area Network (LAN) Knowledge-Based System should Interpret the implications of your findings, address any limitations of your study and discuss the broader implications of your findings

The conclusion of Design And Implementation Of An Online Local Area Network (LAN) Knowledge-Based System should include summarize the main results and conclusions of your project, provide recommendations based on your findings and offer any concluding remarks on the project.

References should List all the sources cited in Design And Implementation Of An Online Local Area Network (LAN) Knowledge-Based System project by following the required citation style (e.g., APA, MLA, Chicago).

The appendices section should Include any additional materials that support your project (Design And Implementation Of An Online Local Area Network (LAN) Knowledge-Based System) but are too detailed for the main chapters such as raw data, detailed calculations etc.