Fabrication Of A Polythene Bag Sealing And Cutting Machine
Complete Fabrication Of A Polythene Bag Sealing And Cutting Machine Project Materials (Chapters 1 to 5):
This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine can cut and seal nylon of different sizes.
It also comprises of materials as follows: Mechanical and Electrical section
Mechanical section include the frame structure, lever and the pedal mechanism.
Electrical section include the transformer, Regular and the micro switch.
Title Page
Letter of Transmittal
Release of Page
Approval Page
Dedication
Acknowledgement
Abstract
Table of Content
CHAPTER ONE
1.1 Introduction
CHAPTER TWO
2.0 Literature Review
2.1 Material for Fabrication and their Properties
2.2 Description of a Simple Polythene Sealing and Cutting Machine
2.3 Selection of the Fabrication Materials
CHAPTER THREE
3.0 Tools for Fabrication
3.1 Fabrication Specification
3.2 Sequence of Operation
CHAPTER FOUR
4.0 Cost of Production/Cost Analysis
4.1 Cost of Material
4.2 Labour / Cost
4.3 Machine Cost / Tools Cost
4.4 Transportation
4.5 Total Cost
CHAPTER FIVE
5.0 Safety Precautions
5.1 Maintenance of the Machine
CHAPTER SIX
6.0 Discussion
6.1 Conclusion
6.2 Recommendation
References
1.1 INTRODUCTION
The portable sealing machine is one of the most important fabrication of engineers of 20th century, the achievements led to sweet relieve for Agriculturist, industrialist, marketers etc. for this purpose, the production of Agricultural and industrials, goods which need appropriate attention for packaging and storage has been on the increase.
Previously, the packaging system has done by the use of paper, clothing material, etc. These methods are either given way to cellophane packaging system.
Different types of packaging system emerged owing to the facts of invention of which the most commonly used is the cellophane packaging and sealing.
It has the following advantages:
Low cost of production, high resistance to acid attacks, inertness, corrosion etc.
Polyethylene is used in packaging goods like ice cream, umbrellas, exercise books, pure water, beverages, weavon, packet shirts, bread, biscuits etc. the following properties polyethylene possessed are the reasons for its varieties of purpose that is to say how cost of production, inertness, resistance to acid, and corrosion water.
The use of polythene cannot be overemphasized. Most of food packaging for hygienic. The technology of cellophane permits raw materials of textile industries to be carried with sealed polyethylene the finished products are either marketed or exported with polyethylene packaging. Most utensils are packaged with polyethylene. Special polyethylene materials have been invented of recent that have shock absorber which gives protection to the breakable material. Since this packaging came up, there had been a safer conveyance of glass and ceramics materials, especially for transportation and exportation of finished goods.
Also, it is in packaging most of electronic gadgets which includes; computers, amplifiers, calculators, radio and T.V sets etc. for safety purposes. It will be needless talking about polyethylene. Without talking about the machines used in sealing generally. Some of the machines used in the industries include cellophane sealing machine used in sealing polyethylene materials, pneumatic, electrical sealing machine handled by electrical heater and needle point action and hand sealing.
The introduction of Fabrication Of A Polythene Bag Sealing And Cutting Machine should start with the relevant background information of the study, clearly define the specific problem that it addresses, outline the main object, discuss the scope and any limitation that may affect the outcome of your findings
Literature Review of Fabrication Of A Polythene Bag Sealing And Cutting Machine should start with an overview of existing research, theoretical framework and identify any gaps in the existing literature and explain how it will address the gaps
Methodology of Fabrication Of A Polythene Bag Sealing And Cutting Machine should describe the overall design of your project, detail the methods and tools used to collect data explain the techniques used to analyse the collected data and discuss any ethical issues related to your project
Results should include presentation of findings and interpretation of results
The discussion section of Fabrication Of A Polythene Bag Sealing And Cutting Machine should Interpret the implications of your findings, address any limitations of your study and discuss the broader implications of your findings
The conclusion of Fabrication Of A Polythene Bag Sealing And Cutting Machine should include summarize the main results and conclusions of your project, provide recommendations based on your findings and offer any concluding remarks on the project.
References should List all the sources cited in Fabrication Of A Polythene Bag Sealing And Cutting Machine project by following the required citation style (e.g., APA, MLA, Chicago).
The appendices section should Include any additional materials that support your project (Fabrication Of A Polythene Bag Sealing And Cutting Machine) but are too detailed for the main chapters such as raw data, detailed calculations etc.