Fabrication Of Metal Shelf
Complete Fabrication Of Metal Shelf Project Materials (Chapters 1 to 5):
Bookshelf, a Mechanical arrangement of materials were documents are stored, it could be made with metal or wood. But this one is fabricated with metal.
The type of metal used in the fabrication is mild steel and square baluters.
The undismountable bookshelf which has five partitions and four compartment under went many process namely, the drawing and the dimensioning of the bookshelf, needed materials, the marking out and cutting of the materials, welding, smoothing and filling of the work, then finally painting.
Actually our dreams has come through in fabrication of metal shelf that will be economically and at the same time meet up with the needed standard despite the subsidized rate.
Title page
Letter of transmittal
Release
Approval page
Dedication
Acknowledgement
Abstract
Table of content
CHAPTER ONE
1.1 Introduction
1.2 Description of metal shelf
CHAPTER TWO
2.1 Material selection
2.2 Construction
2.3 Workshop sequence of operation
CHAPTER THREE
3.1 Material cost
3.2 Machine cost
3.3 Labour cost
3.4 Reporting
CHAPTER FOUR
4.1 Conclusion
4.2 Recommendation
4.3 Reference
1.1 INTRODUCTION
A bookshelf is an invention with compartments and partitions where books and files are packed in offices, libraries and even homes.
A bookshelf can be wooden, metallic or even glassed. They could also be dismountable metallic and indismountable.
In our project, we decide to design and fabricate an undismountable metallic bookshelf. Certain factors were considered before embarking on this project.
An undismountable metallic bookshelf, have a longer life span and serves its purpose better than a wooden bookshelf. Also lose of parts of many dismountable bookshelf held us into opting for the one with its pant in tact.
Nevertheless, the need for preservation of books to enhance researches and studies purpose has brought about the construction of bookshelves for offices, libraries and homes. Thus, these protects the books from been easily destroyed by ants, rats, and from children.
And it also enhances systematic arrangement of books for easy reference of location.
In the fabrication, the frame first erected before making the sides and the partitions with the steel material. The mass and volume of the books to be contained by the partitions were considered before they were erected; so certain experiments were carried out which will be further discussed in the report.
1.2 DESCRIPTION OF THE METALLIC SHELF
This description of the metallic shelf is as shown in fig 1. It is made up of the following pants.
(i) side
(ii) back
(iii) partition
(iv) frame work
(v) door
(i) SIDE
The side of the bookshelf are shown in fig 1a. It is made up the square pipe frame and the mild steel plate material welded to it. Each side is specially designed to act as support in carrying the load under any stress. the load dispersed on the system. The sides measures and tacted at an angle of 900 to each other giving the system a more rigid frame work. The sides measures.
The introduction of Fabrication Of Metal Shelf should start with the relevant background information of the study, clearly define the specific problem that it addresses, outline the main object, discuss the scope and any limitation that may affect the outcome of your findings
Literature Review of Fabrication Of Metal Shelf should start with an overview of existing research, theoretical framework and identify any gaps in the existing literature and explain how it will address the gaps
Methodology of Fabrication Of Metal Shelf should describe the overall design of your project, detail the methods and tools used to collect data explain the techniques used to analyse the collected data and discuss any ethical issues related to your project
Results should include presentation of findings and interpretation of results
The discussion section of Fabrication Of Metal Shelf should Interpret the implications of your findings, address any limitations of your study and discuss the broader implications of your findings
The conclusion of Fabrication Of Metal Shelf should include summarize the main results and conclusions of your project, provide recommendations based on your findings and offer any concluding remarks on the project.
References should List all the sources cited in Fabrication Of Metal Shelf project by following the required citation style (e.g., APA, MLA, Chicago).
The appendices section should Include any additional materials that support your project (Fabrication Of Metal Shelf) but are too detailed for the main chapters such as raw data, detailed calculations etc.