Formulation And Production Of Levera Soap
Complete Formulation And Production Of Levera Soap Project Materials (Chapters 1 to 5):
The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion.
In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was because soap produced from grease or tallow tends to dissolve slowly at room temperature, whereas, soap of palm kernel oil product gives a quicker lather which is relatively suitable.
Different formulation were developed, but the most appropriate was the ratio 2:1 of P.K.O to caustic soda solution. This ratio gave a very quality soap. The other formulation are 3:1 and 1:1 of good quality and physically, they were observed to be brittle.
The test and analysis carried out on the P.K.O and the soap produced proved that the saponification value of the P.K.O was 248.24; refractive index was 1.451, free fatty value of 1.58; acid value of 4.43; moisture content of 26.78%; free alkali of 0.214%, alcohol insoluble matter of 1.43% and PH value of 9.98 at a temperature reading 2980c. The soap was moderately soft and very soluble in water.
The quality of soap produced conformed to all the requirements for toilet soap from Standard Organization of Nigeria (SON). It was found out that the soap has no inferiors effect on the skin; does not contain any visible foreign matter which means that the soap was properly mixed, does not encourage microbial growth and lathers effectively.
It was also found that the cost of producing the herbal/medicated or antiseptic soap was N63.00k compared to that sold in the market for N100.00k per tablet. Thus, the production based on the research work was profitable and more economical.
INTRODUCTION
Soap is defined as the sodium salt of fatty acid. It is a saponification products of fat and oil.
The washing industry, usually known as the soap industry, has root over 2000 years in the past, a soap factory being found in the Pompeii excavation. However, among the many chemical process industries, none has experience such a fundamental change in chemical raw materials as have the washing industries. It has been generally accepted that the per capital use of toilet soap is a reliable guide to the standard of living for any country.
Moreover, the process of soap making has progressed from batch-wise saponification process to continous saponification process, which was first installed in 1937 by procter and gamble.
In otherwords, soap is the earliest detergent known to man and apparently was first made by the Roman from animal’s fats and wood ashes (which contains the alkali potassium carbonate) about 2500 years ago. In colonial America and until the 1940s, most soap was manufactured by an alkaline hydrolysis reaction called saponification.
1.1 SCOPE AND OBJECTIVES OF THE RESEARCH WORK
This project is concerned with the production of a high quality soap from local raw materials such as palm kernel oil, hence emphasis shall be placed on soaps rather than on soapless detergents.
The making of soap is one of the oldest of chemical synthesis/whom the German tribeman of Caeser time boiled goat tallow with potash leached from the ashes of wood fire’s they were carrying out the some chemical reactions as the one carried out on a tremendous scale by modern soap manufacturers, hydrolysis of glycerine which yields salt of the carboxylic acids and glycerol.
Soap may vary in composition and method of processing: if made from olive oil, it is enstile soap; alcohol can be added to make it transparent; our can be beaten in to make it float; perfumes, dyes, germicides can be added; if a potassium salt (instead of a sodium salt) is used; it is a soft soap. Chemically however, soap remains pretty much the same and does its job the same way.
The overall objective of this research project is geared towards producing soap of very good quality from palm kernel oil at a very economic way.
1.2 SIGNIFICANCE OF THE RESEARCH
Soap can be produced with a wide range variety of raw material. It basic composition is a product of an alkali, or a mixture of alkalis an oil or its blend. However, from literature survey, it was found that various types of oils differed, consequently their soap product differed.
In this research work, high quality industrial soap can be produced using palm kernel oil. The work involves working out the soap formulae and using the formulations to produce soap. The soaps so produced will then be tested analytically to determine their various physical and chemical properties. Finally, recommendations will be made.
The introduction of Formulation And Production Of Levera Soap should start with the relevant background information of the study, clearly define the specific problem that it addresses, outline the main object, discuss the scope and any limitation that may affect the outcome of your findings
Literature Review of Formulation And Production Of Levera Soap should start with an overview of existing research, theoretical framework and identify any gaps in the existing literature and explain how it will address the gaps
Methodology of Formulation And Production Of Levera Soap should describe the overall design of your project, detail the methods and tools used to collect data explain the techniques used to analyse the collected data and discuss any ethical issues related to your project
Results should include presentation of findings and interpretation of results
The discussion section of Formulation And Production Of Levera Soap should Interpret the implications of your findings, address any limitations of your study and discuss the broader implications of your findings
The conclusion of Formulation And Production Of Levera Soap should include summarize the main results and conclusions of your project, provide recommendations based on your findings and offer any concluding remarks on the project.
References should List all the sources cited in Formulation And Production Of Levera Soap project by following the required citation style (e.g., APA, MLA, Chicago).
The appendices section should Include any additional materials that support your project (Formulation And Production Of Levera Soap) but are too detailed for the main chapters such as raw data, detailed calculations etc.