Home » Project Material » Operation And Maintenance Of Steam Boiler

Operation And Maintenance Of Steam Boiler

(A Case Study Of Kwara State Polytechnic, Ilorin)

6 Chapters
|
45 Pages
|
5,037 Words
|
Electrical Electronics Engineering

Complete Operation And Maintenance Of Steam Boiler Project Materials (Chapters 1 to 5):

ABSTRACT

The steam boiler is to control specification problem, to illustrate how the evolving algebra approach to the specification and the verification of complex system can be exploited for a reliable and well documented development of executable but formally inspectableand systematically modifiable code. A hierarch of stepwise defined abstract machine model in developed, the ground version of which can be checked for whether it faithfully reflects the informally given problem.The sequence of machine model the yield various abstract views of the system, making the various design decisions transparent, and leads to CH programs.The Abstract machine are evolving algebras and thereby have a rigorous semantically foundation allowing us to formalize and prove, under precisely stated assumption, some typical sample properties of the system.This provides insight into the structure of the system which supports easily maintenance extensions and modifications of both the abstract specification and the implementation.

TABLE OF CONTENT

Title
Certification
Dedication
Acknowledgement
Abstract
Table Content
CHAPTER ONE
1.0 Introduction 1
1.1 Background of steam boiler 4
1.2 Aim 5
1.3 Objective of the study 6
1.4 Scope of the Study 7
1.5 Justification of the study 7
1.6 Statement of the study 10
CHAPTER TWO
2.0 Literature Review 12

CHAPTER THREE
3.0 Materials and Method 15
3.1 Description of the fuel used 17
3.2 Procedure of the steam boiler machine 18
3.3 Parts of the machine 20
3.4 Strength of the material used 21
3.5 Maintenance of steam boiler 22
3.6 Mechanical properties of steam boiler 22
3.7 Uses of steam boiler 24
3.8 Function of steam boiler 25
3.9 Merits and demerits of steam boiler 26

CHAPTER FOUR
4.0 Experimental Analysis 28
4.1 Result 29

CHAPTER FIVE
5.0 Conclusion 30

CHAPTER SIX
6.0 Recommendation 33
6.1 Reference 36

 

CHAPTER ONE

1.0 INTRODUCTION
A steam boiler is an enclosed vessel in which water is heated and circular, either as hot water steam, to produce a source to either heat or power. A central heating plant may have one or more boiler that use gas oil, or coal as fuel. The steam generated is used to heat building, provide hot water, and provide steam for cleaning, sterilizing, cooking and laundering operation. Small package boiler also provides steam and hot water for small building.
A careful study of his course can help you acquire useful knowledge of steam generation, types of boilers pertinent to boiler operations, various fitting commonly found on boilers, and so on. The primary objective of this chapter is to lay the foundation for you to develop skill in the operation, maintenance, and repair of boilers.
The boiler system is made up of:
1. Feed water system
2. Steam system
3. Fuel system
Are feed water system provide water to the boiler and regulates it automatically to meet the steam demand. The water supplied to boiler that is converted to steam is called feed water the success of feed water are
1. Condensates or condensed steam returned from the process
2. Make up water which is the raw water which must come from outside.
Steam boilers have several strength that have made them a common feature of building. They have a long life, can achieve efficiency up to 95% or greater. Provide and effective method of heating a building and in the case of steam system required little or no pumping energy. However fuel costs can be considerable, regular maintenance is required and if maintenance is delay repair can be costly guidance for the construction, operation and maintenance of boilers is provided primary by the ASME <American society of mechanical engineers> which produce the following resources. Rule for construction of heating boiler and pressure vessel cods section IV-2007 Recommended rules for the car and operation of heating boilers, Boiler and pressure vessel code, section VII-2007. Boilers are often one of the largest energy users in a building. For every year a boiler system goes unattended boiler costs can increase approximately 10% boiler operation and maintenance is therefore a good place to start when looking for ways to reduce energy use and save money. Barry Allen (2008).
.

1.1 BACKGROUND OF STEAM BOILER
This paper investigates the options for green house gas emission reduction from the installation of new and retrofit high efficiency boilers, The types of boiler addressed are industrial boilers, and residential boilers, each of these boiler types have unique technological boilers, each of these boiler types have unique technological characteristics and regulatory requirement that need to be addressed to determine if an appropriate performance standard can be developed. Some boiler types have additional issue associated with leakage –primary biomas boilers, but are widely distributed in the general population and GHG emission reduction ownership “ right” are an issue that must also be considered. This paper explores this issue and makes recommendations on if and how to proceed with GHG offset methodologies. Kara Technology Manual (2004).

1.2 Aim
– Review the detrimental effects of the urban heat island phenomenon, particularly as a causative factor in promoting exceedance of air quality ozone standards, and identify mitigation alternative that may reduce the effects of the urban heat island.
– Illustrate the difference in temperature between the urbanized center of the surrounding areas in order to identify the health island in the area region
– Evaluate of the relationship between temperature and ozone
– Develop a method to analyses the urban fabric of the area from aerial photographs, thus allowing the determination of the proportion of vegetative, roofed and paved surface as a function of land use.
– Evaluates of the effectiveness of possible mitigation strategies as applied to the area, with special on vegetation and paying material.

1.3 OBJECTIVES OF A STEAM BOILER
(1) To examine the design of boiler and connected steam pipeline manufacture in other countries
(2) To examine the design of boiler and to approve the pressure parts modification proposal, in order to improve the efficiency and steam generating capacity of boiler
(3) To approve the design, drawing of small industries boiler and to inspect them during manufacturing
(4) To inspect the boiler pressure parts subject for repair and replacement during manufacturing
(5) To verify and approve the design and flexibility analysis of high pressure steam line piping
(6) To conduct periodical testing of welding electrodes.
(7) To conduct welders examination for initial and requalification
(8) To conduct examination in order to issue certification of competency as a first class boiler attendants.

1.4 SCOPE OF THE STUDY
The methodology for the implementing measures of energy using product been define by the commission established in 2004/05 in a well define (MEEUP). Within this methodology a common frame work to gather information as a basic for the evaluation of product is set, this frame work enable an evaluation the performance of product covering the relevant the performance of product covering the relevant criteria of eligibility for implementing measure under the directive with the extension of the scope of the ecodesign directive on energy related product the methodology to energy related product {MEERP}.it now covers also the specific aspects of energy consumption but influence the energy consumption of other product (e.g. windows heating controls). Arora. N. Kumar (1997)

1.5 JUSLIFITICATION OF THE STUDY
During the process of dyeing and drying in textile industry, steam plays an significant role the industrial boilers is used combined with rising finishing scenter dyeing machine, drying room and mixing mill. The temperature range is 602 1800 c justification of stand by steam boiler is available for textile industry which achieves high working temperature {3300c} under low working pressure (<10 bar). Except hot oil boiler, oil gas fired steam boiler and biomass water tube steam boiler is also suitable for textile factories. BhattachryaEtal (2009)

1.6 STATEMENT OF THE PROBLEM
The purpose of this project is to identify the effect that surface modification have on the urban heat island phenomenanon and related ozone problem in the metropolitan area of Ilorin.
– The basic hypothesis sis that urban, summertime temperature can be significantly lower by increasing the vegetative landscape cover enhancing the solar reflectivity of paved and roofed surface within an urban area.
– It is proposed that in addition to a decreasein temperature the modification of an urban to include more vegetative cover and lighter, lower albede surface will also reduce energy consumption, Ozone exceedance, and detrimental environmental and human health effects associated with high levels of ozone

The analysis is divided into three main parts.
– The first section of this report introduces the causes of ground level ozone and iteffects in urban areas. It explains both the chemistry and transport associated with ozone exceedance.
– Second the section is a compilation of the most viable mitigation strategies of urban heat island: the effect, implementation strategies and specific strength and weaknesses associated with each approach are described, including a comparison of asphalt and concrete pavements system using a life cycle analysis approach
– The final section provides a case study of the Chicago area, This study entailed and examination of the land use development of an urban fabric analysis in which total vegetative, pave, and roofed surface are investigated and quantified, and discussion on the effectiveness of possible mitigation strategies in the workshop area, in general the associated findings of my research are located within this final section. Robert Mucci (2005).

 

You Might Like These:
Project Structure

The introduction of Operation And Maintenance Of Steam Boiler should start with the relevant background information of the study, clearly define the specific problem that it addresses, outline the main object, discuss the scope and any limitation that may affect the outcome of your findings

Literature Review of Operation And Maintenance Of Steam Boiler should start with an overview of existing research, theoretical framework and identify any gaps in the existing literature and explain how it will address the gaps

Methodology of Operation And Maintenance Of Steam Boiler should describe the overall design of your project, detail the methods and tools used to collect data explain the techniques used to analyse the collected data and discuss any ethical issues related to your project

Results should include presentation of findings and interpretation of results

The discussion section of Operation And Maintenance Of Steam Boiler should Interpret the implications of your findings, address any limitations of your study and discuss the broader implications of your findings

The conclusion of Operation And Maintenance Of Steam Boiler should include summarize the main results and conclusions of your project, provide recommendations based on your findings and offer any concluding remarks on the project.

References should List all the sources cited in Operation And Maintenance Of Steam Boiler project by following the required citation style (e.g., APA, MLA, Chicago).

The appendices section should Include any additional materials that support your project (Operation And Maintenance Of Steam Boiler) but are too detailed for the main chapters such as raw data, detailed calculations etc.