Home » Project Material » Repair And Rehabilitation Of A Faulty Refrigerator

Repair And Rehabilitation Of A Faulty Refrigerator

5 Chapters
|
25 Pages
|
2,471 Words
|
Mechanical Engineering

Complete Repair And Rehabilitation Of A Faulty Refrigerator Project Materials (Chapters 1 to 5):

ABSTRACT

FLUSHING OF THE CONDENSER
The refrigerant gas let into the condenser through the compressor and the vacuum pump was connected to the condenser to absorb dirty.
REFILLING OF GAS INTO THE COMPRESSOR
Gas was refilled into the compressor due to shortage of gas and it was filled inside the charging value and refrigerant.
CHANGING OF DRIVER STRAINER DUE TO BLOCKAGE
The driver strainer was change due to blockage with the help of oxygen and acetylene welding.
SPRAYING OF THE FRIDGE
The compressor was put on and the compressed air through the holes to the gun due to high pressure inside the tank. The air then forces the point out of the gun for spraying.

TABLE OF CONTENT

Title Page ii
Release Page iii
Transmittal Page iv
Approval Page v
Abstract vi
Acknowledgement vii
Dedications viii
Table of content ix

CHAPTER ONE
Introduction 1

CHAPTER TWO
Literature Review 3

CHAPTER THREE
Tools Used 8

CHAPTER FOUR
Final Test and Sequence of Opera 11

CHAPTER FIVE
Conclusion 14
Reference 15
Appendix Two 16

 

CHAPTER ONE

INTRODUCTION
Refrigeration is a science which deals with the process of reducing and maintaining the temperature of the mechanical appliance which caries out the refrigeration principle as in transferring heat from a cold reservoir to a hot reservoir and requires a work input. However this heat flow is transmitted through a medium. Heat is transmitted by conduction convention are extensively adopted in refrigeration.

PURPOSE:
The purpose of this project work is simply to acquire a general knowledge in the maintenance of refrigeration equipment such as cold rooms refrigeration e.t.c.
In the course of this project, we worked on a faulty refrigerator at Engr. Ayogu’s office.

SCOPE
The scope of this project was limited to maintenance and repair of a faulty refrigerator. This report is basically comprised of all arrive at a proper and safe working conduction of a faculty refrigerator.

You Might Like These:
Project Structure

The introduction of Repair And Rehabilitation Of A Faulty Refrigerator should start with the relevant background information of the study, clearly define the specific problem that it addresses, outline the main object, discuss the scope and any limitation that may affect the outcome of your findings

Literature Review of Repair And Rehabilitation Of A Faulty Refrigerator should start with an overview of existing research, theoretical framework and identify any gaps in the existing literature and explain how it will address the gaps

Methodology of Repair And Rehabilitation Of A Faulty Refrigerator should describe the overall design of your project, detail the methods and tools used to collect data explain the techniques used to analyse the collected data and discuss any ethical issues related to your project

Results should include presentation of findings and interpretation of results

The discussion section of Repair And Rehabilitation Of A Faulty Refrigerator should Interpret the implications of your findings, address any limitations of your study and discuss the broader implications of your findings

The conclusion of Repair And Rehabilitation Of A Faulty Refrigerator should include summarize the main results and conclusions of your project, provide recommendations based on your findings and offer any concluding remarks on the project.

References should List all the sources cited in Repair And Rehabilitation Of A Faulty Refrigerator project by following the required citation style (e.g., APA, MLA, Chicago).

The appendices section should Include any additional materials that support your project (Repair And Rehabilitation Of A Faulty Refrigerator) but are too detailed for the main chapters such as raw data, detailed calculations etc.