Home » Project Material » Use Of Tendering And Competitive Bidding In Public Sector Procurement

Use Of Tendering And Competitive Bidding In Public Sector Procurement

(a case study of ministry of works) Imo state)

5 Chapters
|
82 Pages
|
9,281 Words
|
Marketing

Complete Use Of Tendering And Competitive Bidding In Public Sector Procurement Project Materials (Chapters 1 to 5):

ABSTRACT

The subject matter of this study is the use of tendering and competitive bidding in the public sector procurement. A case study of ministry of works, Imo Srate, Owerri. Among the objectives is stated in chapter one of the study.
In other to attain to the objectives a research questions was constricted to enable the researcher collect relevant information in the subject matter. The researcher reviewer related iterative and some facts drawn from the work in chapter two. Chapter three welcomes the research methodology; the population and size etc. chapter four contains the researcher’s presentation and analysis of data.
Finally chapter five is about conclusion, summary and recommendations.

 

TABLE OF CONTENT

Title
Approval page
Dedication
Acknowledgement
Abstract

CHAPTER ONE
1.0 Introduction
1.1 Background of the study
1.2 Statement of the Problem
1.3 Objective of the study
1.4 Research question
1.5 Statement of hypothesis
1.6 Significance of the study
1.7 Scope of the study
1.8 Limitation of the study
1.9 Definition pf terms

CHAPTER TWO
2.0 Literature review
2.1 Meaning of tendering and completive bidding
2.2 Method of tendering and completive bidding
2.3 Public sector purchasing tendering procedures
2.4 Purchasing policies in the public sectors
2.5 General procedures of competitive bidding
2.6 Tender document
2.7 Pre- qualification for tenders
2.8 Tenders board and tenders

CHAPTER THREE
3.0 Research design and methodology
3.1 Introduction
3.2 Research design
3.3 Sources/ method of data collection
3.4 Population and sample size
3.5 Sample techniques
3.6 Validity and reliability of measuring instrument
3.7 Method of data analysis

CHAPTER FOUR
4.0 Presentation design and methodology
4.1 Introduction
4.2 Presentation of data
4.3 Analysis of data
4.4 Test of hypothesis
4.5 Interpretation of results

CHAPTER FIVE
5.0 Summary, conclusion and recommendation
5.1 Introduction
5.2 Summary of finding
5.3 Conclusion
5.4 Recommendation
Reference
Appendix

CHAPTER ONE

1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
The dictionary of purchasing and supply management defines tendering and competitive bidding as offers from tenderness without callous, usually in scaled enveloped delivered by a time and date specified in the invitation to tendering for supply of goods and services.
Uzor (2004:440) in (Lysons 1996:42) defined tendering as a purchase procedure whereby potential suppliers are invited to make a firm and unequivocal offer of the price and terms which on acceptance shall be the basic of the subsequent contract.
Frank Harris and Ronald Mc Caffer defined competitive bidding as an invitation by an organization (i.e the client) to supplier to submit its quotation for a job or services required by the client organization the whose main objective is to determine the performance abilities of the supplier.
Tendering and competitive biding is usually required when an organization or a firm needed supply of certain goods such as furniture, generating set, caterpillars, vehicles, drugs, medical equipment, and computers e.t.c
Tendering is widely used in the public sector to ensure observance of the principles of public accountability. It many also be used by private sector organization more especially in respect of construction and services contracts to obtain prices and terms of the contract. According to Compton and Jessap (1989) such tenders are opened only at the time and data specified by the tender panel of qualified persons who records the necessary details the essence of this research therefore is to examine the use of effective bidding in improving public sector procurement.

1.2 STATEMENT OF PROBLEMS
The problems of tending and competitive bidding and its implications on public sector procurement has been identified by many as not only enormous but complex now that there is serious needs on the part of our various government to provide more services with little funds and issue of corruption in our “public life” some of the problems are
(i) A great numbers of problems have bedeviled sector tendering which has great affection in the quality of contract entered by the public sector organization.
The entire contract system has gone sour as a result of mis management, corruption mis application of rules and regulation set to be adhered to in contracting for goods and services.
(ii) The negligent on the part of the various authorities to ensure a uniform codes standard of practice and professional ethics of conduct all have made a complete miss of our public sector tendering.
(iii) The out data nature of our financial regulation which guide the operations public procurement as well as public sector tendering in the greatest problem of our public sector tendering and therefore has serious implications on the efficiency and effectiveness of public sector contract management and administration.
(iv) Competitive bidding in public sector procurement usually ends with the lowest price bidder getting the award of the purchasing firm gains a population for negotiation with the towerst bidder after bids are opened. This will make future bidders not to offer their best price initially, believing that they do better in any subsequent negotiation. They will adopt a system of submitting a bid low enough to allow them to be included in any negotiations. But their initial bid will not be as low as when it is anticipated that the award be made to be the lowest bidder without further negotiation. Competitive bidding tends to put great pressure on suppliers to reduce their cost to be able to bed low but profitable prices. This cost pressure may result sacrifice in product quality development efforts and other vital services.

1.3 OBJECTIVES OF THE STUDY
In most public establishment there is a wide misunderstanding of tendering and competitive bidding as a tool for public sector procurement.
(i) To examine the use of tendering in improving the efficiency and effectiveness of public sector procurement.
(ii) To find out the reason why there is misunderstanding of competitive bidding.
(iii) Determine whether or not there is need for an independent unit to be created with trained and qualified professional to handle public sector procurement.
(iv) To examine the procedures and processes of tendering and contract awards and the skills of officers involved in public tendering and contract management.

1.4 RESEARCH QUESTIONS
Based on the project topic and objective of the research, the following question were developed by the researcher:-
(i) Does tendering have a role to play in improving the efficiency and effectiveness of public sector procurement?
(ii) What qualifies a bidder to be invited to bid?
(iii) Has there been instances where the lowest bidders are not offered the job?
(iv) Can the current tendering process or procedures as used by the public sector organization eliminate corruption and build accountability and transparently in the public sector?
(v) Are the officers handling tendering in the public sector qualify?

1.5 STATEMENT OF HYPOTHESIS
Based on the research question formulated the following hypothesis are formulated.
HYPOTHESIS ONE
Ho: tendering is an effective tool in public sector procurement
H1: tendering is an effective tool in public sector procurement.
HYPOTHESIS TWO
Ho: There is no effective method the ministry adopt other than competitive bidding
H1: there is another effective method the ministry adopt other than competitive bidding

1.6 SIGNIFICANCE OF THE STUDY
The significance of this research work is to help the research or showers to know the significance of this. Study to discover whether there will need for effective and efficient use of tendering and competitive in the ministry. At the end of this work the ministry will be able and capable of ensuring that. There is effective and efficient use of tendering and competitive bidding in ministry.
(i) This research work be beneficial to the ministry of works the researcher himself and also to the public and private organization under study.
(ii) It creates opportunity for unknown contactor or supplier to become known especially when it is successful.
(iii) It makes public accountability possible
(iv) The research work allows keen competition which may produce cheaper tender figure.
(v) It is an opportunity to get genuine tenderers who are actually interested in the project.

1.7 SCOPE OF THE STUDY
This study has been limited to the public sector organizations.
Tendering and competitive bidding has play many role in the management and administration of public sector contract, this study would have covered all the ministries departments, Agencies, Boards even the local government areas in this country but the researcher after due considerations of various variables and implications decide to concentrate on the study of the implications of effectiveness and efficient tendering in the administration and management of contract in the ministry of works and housing, Owerri Imo State. In doing this the researcher concentrated on most of the department and units that have one or other things to do with the subject matter of this study.
These departments or units include administration, engineering, planning, finance of these areas well give a great insight as what takes place in other ministries departments, Board, Agencies etc.

1.8 LIMITATION OF THE STUDY
In the process of conducting this study the researcher has confronted with the various problems among them are:
(i) It was not easy for the researcher who had to combine attending lectures in school and other activities in school with the various visits to the ministry during this research work. This in no small way limit the level of investigation, the research intended to carry out.
(ii) Yet another limitation faced by the researcher was financial constraints. This made it impossible for the researcher to make all the necessary visits in order to obtain the right quality and quality of information the research of this nature requires.
(iii) Lastly many officials changes with the management and administration of tendering and competitive bidding and public sector contracts were not keen to give out much needed information by way of documents and forms which were classified as “ strictly confidential” by the government.

1.9 DEFINITION OF TERMS
(1) BID: A quotation for a price or other conditions for contracts whether for payment or acceptance.
(2) LEAD TIME: This is the interval between when a need is perceived and the fulfillment or satisfaction of that need.
(3) TENDER: It is the procedure through potential suppler are invited through newspaper and other selected media advertising to make a firm and unequivocal offer of the price and terms which on acceptance, shall be the basis of the subsequent contract in competition with others.
(4) COMPETITIVE BIDDING: This is one of the methods by which the right price can be obtained.
(5) QUOTATION: A formal statement prepared by a contactor/ supplier to his customer that includes cost estimates specification and other key information about an agreement between the two parties.
(6) GOVERNEMNT: An institution with power to govern and direct the affairs of a state.
(7) EVALUATION: The process of finding out and deciding the amount and value of something.
(8) NEGOTIATION: Seeking agreement between the purchaser and the contractor/ supplier on mutually acceptance terms and conditions prior to conclude a contract.
(9) ANALYSIS: The process of breaking components into separate parts or units in order to examine each unit and constitute critically.
(10) CERTIFICATE: Act of licensing by a document formally testing the fulfillment of conditions.
(11) PROCEDURE: A May, system or pattern of performing a work, service, suppliers etc.
(12) PERFORMANCE BONDS: This is an undertaking or security to perform a contract as required and failure to perform as required the client will be compensated by the supplier or contractor.
(13) SPECIFICATION: This is the description of any objective materials or process in sufficient detail requirement of a job/ suppliers or contract which the contractor or the supplier must compile with. It is what the supplier must supply to the buyer as describable by the buyer.
(14) SOURCING: This is a process and procedure used by the buyers to survey, evaluate and determine which supplier that can meet with the best requirement of their organization.
(15) SOURCING POLICY: These are policies developed to guide the purchasing functions in respect of who may be the major sources of the organizational suppliers.
(16) QUALITY: Quality is the fatality of futures and characteristic of a product or a serves that bears in the ability to satisfy a sated or implied needs.
(17) PRICE: This the amount of money for which a thing is offered sold or brought
(18) PRICE ANALYSIS: This is the examination of the sellers price without examination elements of the cost and profit element that make up the price.
(19) FAIR PRICE: A fair price is the lowest price that make it possible for a continuous supply of the right quality materials by the supplier where and when needed.
(20) SELECTIVE TENDER: There a method where only competent suppliers on the approved list of supplies are invited by the buying firm to tender.
(21) FORWARD BUYING: This is a buying practice which embraces the buying of materials in quantity more that it current requirements.
(22) STANDARDIZATION: It is an agreement on definite sizes, design, quality and the like.
(23) CONTRACT: It can be defined as an agreement between two or more persons which is intended by them to have legal consequences.
(24) PRICING: This is the process of determine the price
(25) ORDER: This is an instruction to a manufacturer or trader to supply something

You Might Like These:
Project Structure

The introduction of Use Of Tendering And Competitive Bidding In Public Sector Procurement should start with the relevant background information of the study, clearly define the specific problem that it addresses, outline the main object, discuss the scope and any limitation that may affect the outcome of your findings

Literature Review of Use Of Tendering And Competitive Bidding In Public Sector Procurement should start with an overview of existing research, theoretical framework and identify any gaps in the existing literature and explain how it will address the gaps

Methodology of Use Of Tendering And Competitive Bidding In Public Sector Procurement should describe the overall design of your project, detail the methods and tools used to collect data explain the techniques used to analyse the collected data and discuss any ethical issues related to your project

Results should include presentation of findings and interpretation of results

The discussion section of Use Of Tendering And Competitive Bidding In Public Sector Procurement should Interpret the implications of your findings, address any limitations of your study and discuss the broader implications of your findings

The conclusion of Use Of Tendering And Competitive Bidding In Public Sector Procurement should include summarize the main results and conclusions of your project, provide recommendations based on your findings and offer any concluding remarks on the project.

References should List all the sources cited in Use Of Tendering And Competitive Bidding In Public Sector Procurement project by following the required citation style (e.g., APA, MLA, Chicago).

The appendices section should Include any additional materials that support your project (Use Of Tendering And Competitive Bidding In Public Sector Procurement) but are too detailed for the main chapters such as raw data, detailed calculations etc.