Assembling And Maintenance Of A 6Kva Inverter With Solar Energy

ABSTRACT

This work is on assembling and maintenance of a 6KVA inverter with solar energy. Solar inverter converts the variable direct current (DC) output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be fed into a commercial electrical grid or used by a local, off-grid electrical network. It is a critical component in a photovoltaic system, allowing the use of ordinary AC-powered equipment. The aim of this project is to study how to assemble and maintain a 6KVA inverter with solar energy. The work was carried out by making available all the required components, and assembles them according to the assembling diagram used. Also, the operation of the component used was studied which help us to maintain the device. At the end of the whole work the device was completely assembled, the result during the test shows that the device was able to respond to its operation. In conclusion, this device was assembled and tested. Solar panels produce direct electricity that charges the 12v battery used. An inverter is used to produce an alternating current that is used to power alternating current (AC) devices.

 

 

CHAPTER ONE

INTRODUCTION

1.1 Background

Inverter integrated with solar energy performs the conversion of the variable DC output of the Photovoltaic (PV) module(s) into a clean sinusoidal 50 or 60 Hz AC current that is then applied directly to the commercial electrical grid or to a local, off-grid electrical network. In an inverter with solar energy, solar cell (also called photovoltaic cell) converts the energy of sunlight directly into electricity through the photovoltaic effect. A Photovoltaic (PV) module is an assembly of cells in series or parallel to increase voltage and/or current. A Panel is an assembly of modules on a structure. An Array is an assembly of panels at a site. Typically, communication support scheme is included so users can monitor the inverter and report on power and operating conditions, provide firmware updates and control the inverter grid connection.

The inverter inverts the DC voltage generated by the solar module into AC. The inverter performs the control loops necessary for all the power management functions necessary including DC/DC and DC/AC. The controller also maximizes the power output from the PV through complex algorithms called maximum power point tracking (MPPT). The PV maximum output power is dependent on the operating conditions and varies from moment to moment due to temperature, shading, cloud cover, and time of day so adjusting for this maximum power point is a continuous process.

This work is aimed assembling and maintaining a 6KVA inverter with solar energy.

1.2 Statement of Problem

If there is one factor that has perpetually maintained the status of Nigeria as a developing country, it is its electricity sector. Till date, many households and industrial businesses cannot be guaranteed of 24 hours supply of electricity from the National grid. At this stage of Nigeria’s social and economic development, the country cannot deliver sufficient energy to the citizens despite huge financial resources that have been expended in the sector.

Rather, Nigerians have continued to rely on electricity generators for their power supply, fuel marketers are taking significant portion of households’ institutions of learning’and businesses’ incomes to supply power, noise pollution from regular humming generators have become integral part of living for many Nigerians with imaginable consequences on their health. Because of these problems, there is a need to assemble of inverter with solar energy, to complement or augment the electricity supply from the National grid, reduce cost of energy consumed and eliminate noise/environmental pollution that is associated with running of generator.

1.3 Aim and Objectives

The aim of this project is to assemble and maintain a 6KVA inverter with solar energy.

The objectives are as follows: –

• (i) To provide efficiency, steadiness in the use of power appliances, by ensuring continuous availability of power supply in the cause of main outage during an execution of an important or urgent assignment. Thereby enabling consumers to meet up with its office duties even when central power is not available.
• (ii) Reduce load on the National grid that turn to be reduce the overall energy consumption dependency on the main energy supply in the country
• Decrease customer utility bill on energy utilization because of its non-fuel consumption, low price and maintenance cost as compared to the convectional sources of power supplies within International and Local market.
• Again, reduce carbon discharges and subsequently reduce global warming particularly in a period when poor climatic change has become a threat to human survival and life in general to all living creatures hence an ever increasing concern to control it.

1.4 Scope of Study

The scope of this work focused on assembling and maintaining a 6kva inverter with solar energy. solar power source makes it possible to provide a clean reliable and quality supply of alternative electricity free of surges or sags which could be found in the line voltage frequency (50Hz).

1.5 Significance of the Project

Carrying out this research will go a long way solving power supply problem in our country. This research work will throw more light on the best techniques for assembling and maintaining an inverter with solar energy. This study will also be designed to be of immense benefit to all the users of solar inverter most especially in industries.

Furthermore, as a consumer, this device will serve as a means of generating his or her own electricity they also will benefit from a reduction in their electricity bills.

Finally, going deep into this work will provide a means of employment to the student involved thereafter making him or her self-employed.

1.6 RESEARCH QUESTION / HYPOTHESIS

At the end of this work, answers to the following questions shall be made known:

1. What is maintenance in solar power inverter?
2. How do you maintenance an inverter?

• Do inverters need maintenance?

1. What is a solar operations and maintenance plan?

Hypotheses

There is a significant relationship between an inverter and solar energy

1.7 LIMITATION OF THE STUDY

There are different capacities of an inverter, but in this work a 6kva inverter was assembled and maintained. An inverter with solar energy was assembling was done with solar panel, solar charge controller, rechargeable battery and inverter.

DEFINITION OF TERMS

Inverter: An apparatus which converts direct current into alternating current.

Solar energy: This is a radiant energy emitted by the sun

Assemble: To gather together solar inverter accessories for the purpose of producing electricity.