Home » Project Material » Construction Of An Electrical Standing Fan

Construction Of An Electrical Standing Fan

ELECTRICAL ELECTRONICS ENGINEERING

INSTRUCTIONS:

You are perusing the project material titled “Construction Of An Electrical Standing Fan.”
The project material on Construction Of An Electrical Standing Fan is available for instant download.
Preview Chapter One of Construction Of An Electrical Standing Fan at no cost.
To access the complete project material for Construction Of An Electrical Standing Fan, kindly make a donation to support the ongoing maintenance and operation of this website.
The provided work on Construction Of An Electrical Standing Fan is intended solely for academic research purposes and should be utilized strictly as a set of guidelines.
Our objective in distributing Construction Of An Electrical Standing Fan is to aid individuals unfamiliar with project research, specifically writers seeking assistance in this area.
Kindly refrain from directly replicating the content provided in Construction Of An Electrical Standing Fan materials.
Feel free to reference “Construction Of An Electrical Standing Fan” in your work, provided that you paraphrase appropriately.
Unauthorized reproduction of Construction Of An Electrical Standing Fan content is prohibited under our Terms of Use.
UniProjects assumes no responsibility if you replicate the content of this Construction Of An Electrical Standing Fan.

ABSTRACT

An electric standing fan includes a fan shaft driven by a fan motor supported by a motor support. An oscillating device includes a rotational shaft connected to the motor support for driving the motor support to oscillate. A transmission gear has an axle connected to the rotational shaft and a gear wheel mounted around the axle and driven by a synchronous motor. An oscillating angle limiting switch detects a rotational angle of the rotational shaft and the gear wheel and sends a signal indicative of the rotational angle.

CHAPTER ONE

1.0Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â INTRODUCTION

A fan is a machine used to create flow within a fluid, typically a gas such as air. The fan consists of a rotating arrangement of vanes or blades which act on the fluid. The rotating assembly of blades and hub is known as an impeller, a rotor, or a runner. Usually, it is contained within some form of housing or case. This may direct the airflow or increase safety by preventing objects from contacting the fan blades. Most fans are powered by electric motors, but other sources of power may be used, including hydraulic motors and internal combustion engines. Fans produce flows with high volume and low pressure (although higher than ambient pressure), as opposed to compressors which produce high pressures at a comparatively low volume. A fan blade will often rotate when exposed to a fluid stream, and devices that take advantage of this, such as anemometers and wind turbines, often have designs similar to that of a fan.

An electric fan allowing selection of oscillating angles and including an oscillating angle limitation switch to limit an oscillating angle of the electric fan.

Electric fans generally include a fan driven by a motor to provide air currents for cooling purposes. Although air conditioners are widely used, electric fans are still an option in view of costs and energy conservation in many families, offices, public areas, and industries requiring dissipation of heat.

Electric standing fans include a power on/off switch and a plurality of speed buttons to allow selection of the speed of the motors of the electric fans for adjusting the wind output. Some of the electric fans include a rotary mechanism to allow rotation of a seat of the motor such that the fan can oscillate in an angle relative to a base of the electric fan, providing wind output in a wider range. However, the oscillating angle of the fan cannot be adjusted. Namely, the fan can only oscillate in a preset angle of the electric fan, leading to limitation to the wind output.

1.1Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â OBJECTIVE OF THE PROJECT

A complete standing fan has an adjustable height for convenient operation, having oscillating heads for more air distribution and great for cooling large rooms. The objective of this work is to construct a standing fan.

1.2Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â SIGNIFICANCE OF THE PROJECT

Apart from cooling, electric standing fans also circulate the air and keep it in motion, maintaining a fresh breeze that cools as well as keeping humidity levels in check. Electric standing fans also add ventilation and prevent the inhalation of dangerous gases and fumes.

1.3Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â LIMITATION OF THE PROJECT

Every type of fan generates noise from the rapid flow of air around blades and obstacles, and sometimes from the motor. Fan noise has been found to be roughly proportional to the fifth power of fan speed; halving speed reduces noise by about 15 dB.
Is not compact and not easy transport compare to other types of fan

1.4Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â APPLICATION OF THE PROJECT

Typical applications include climate control and personal thermal comfort (e.g., an electric table or floor fan), vehicle and machinery cooling systems, ventilation, fume extraction, winnowing (e.g., separating chaff of cereal grains), removing dust (e.g. in a vacuum cleaner), drying (usually in combination with heat) and to provide draft for a fire. While fans are often used to cool people, they do not actually cool air (if anything, electric fans warm it slightly due to the warming of their motors), but work by evaporative cooling of sweat and increased heat convection into the surrounding air due to the airflow from the fans. Thus, fans may become ineffective at cooling the body if the surrounding air is near body temperature and contains high humidity.