Home » Project Material » Construction Of Two Feet Electronics Fluorescent Lamp

Construction Of Two Feet Electronics Fluorescent Lamp

(A Case Of Institute Of Management And Technology (Imt) Enugu States)

5 Chapters
|
32 Pages
|
3,936 Words
|
ELECTRICAL ELECTRONICS ENGINEERING

INSTRUCTIONS:

  • You are perusing the project material titled “Construction Of Two Feet Electronics Fluorescent Lamp.”
  • The project material on Construction Of Two Feet Electronics Fluorescent Lamp is available for instant download.
  • Preview Chapter One of Construction Of Two Feet Electronics Fluorescent Lamp at no cost.
  • To access the complete project material for Construction Of Two Feet Electronics Fluorescent Lamp, kindly make a donation to support the ongoing maintenance and operation of this website.
  • The provided work on Construction Of Two Feet Electronics Fluorescent Lamp is intended solely for academic research purposes and should be utilized strictly as a set of guidelines.
  • Our objective in distributing Construction Of Two Feet Electronics Fluorescent Lamp is to aid individuals unfamiliar with project research, specifically writers seeking assistance in this area.
  • Kindly refrain from directly replicating the content provided in Construction Of Two Feet Electronics Fluorescent Lamp materials.
  • Feel free to reference “Construction Of Two Feet Electronics Fluorescent Lamp” in your work, provided that you paraphrase appropriately.
  • Unauthorized reproduction of Construction Of Two Feet Electronics Fluorescent Lamp content is prohibited under our Terms of Use.
  • UniProjects assumes no responsibility if you replicate the content of this Construction Of Two Feet Electronics Fluorescent Lamp.
ABSTRACT

Engineering being the mother every technology cannot be neglected. Without practical application in the field of engineering. The student and their tutors are impotent. The incrative nature of engineering depends on the technical know-how of the engineer.
The purpose of practical project to students is to help them acquire practical knowledge in their choosing area of specification. It helps them to have a foretaste of the real world.
This report is a comprehensive report on the practices project I did. Precisely, with adequate knowledge and preparation, the student will celebrate victory from time to time.
Onyechi Ifeoma .M.
November, 2007.

The abstract for the project titled “Construction Of Two Feet Electronics Fluorescent Lamp” concludes at this point. To access the complete material, please click Here to donate and download. Alternatively, you can continue scrolling down to read the content of the entire “Construction Of Two Feet Electronics Fluorescent Lamp” project.

TABLE OF CONTENT

Title Page
Dedication
Acknowledgement
Preface
Table Of Content
Abstract

 

Chapter One
1.0 Introduction

Chapter Two
2.0 Literature Review
2.1 Component Description
2.2 Capacitor
2.2.1 Characteristic Of Capacitors
2.3 Resistor
2.4 Transformer
2.5 Transistor
2.6 Diode

Chapter Three
3.0 Principle Of Operation
3.1 Block Diagram
3.2 Circuit Diagram
3.3 Wiring Diagram

Chapter Four
4.0 Construction
4.1 How The Construction Was Made
4.2 Construction Of The Chassis (Casing)
4.3 Flat Pattern Drawing Of The Chassis
4.4 Tools Used During Construction

Chapter Five
5.0 Testing & Result

Chapter Six
6.0 Recommendation And Conclusion
6.1 Recommendation
6.2 Conclusion
Reference

The “Table of Contents” for the project titled “Construction Of Two Feet Electronics Fluorescent Lamp” concludes at this point. To access the complete content, please click on the “Donate & Download” button, or continue scrolling to read Chapter One of Construction Of Two Feet Electronics Fluorescent Lamp project.

CHAPTER ONE

Title Page
Dedication
Acknowledgement
Preface
Table Of Content
Abstract

 

Chapter One
1.0 Introduction

Chapter Two
2.0 Literature Review
2.1 Component Description
2.2 Capacitor
2.2.1 Characteristic Of Capacitors
2.3 Resistor
2.4 Transformer
2.5 Transistor
2.6 Diode

Chapter Three
3.0 Principle Of Operation
3.1 Block Diagram
3.2 Circuit Diagram
3.3 Wiring Diagram

Chapter Four
4.0 Construction
4.1 How The Construction Was Made
4.2 Construction Of The Chassis (Casing)
4.3 Flat Pattern Drawing Of The Chassis
4.4 Tools Used During Construction

Chapter Five
5.0 Testing & Result

Chapter Six
6.0 Recommendation And Conclusion
6.1 Recommendation
6.2 Conclusion
Reference

Chapter One of the project titled “Construction Of Two Feet Electronics Fluorescent Lamp” concludes at this point. To access the entire project, kindly click the “Donate & Download” button. Alternatively, you can scroll down to explore related topics and works similar to Construction Of Two Feet Electronics Fluorescent Lamp.

You Might Like These:

No other related project topic on this website

PROJECTS BY DEPARTMENTS
Frequently Asked Questions

If you’re referencing specific information, quotes, or ideas from “Construction Of Two Feet Electronics Fluorescent Lamp”, provide a citation in the appropriate format such as APA, MLA, or Chicago.

The title page of downloaded document contains information about the author, editor, and publisher of Construction Of Two Feet Electronics Fluorescent Lamp Project material.

Select “Donate & Download,” on top of “Construction Of Two Feet Electronics Fluorescent Lamp” and upon completing your donation, you will be directed to the download page or you can chat with us for alternative donation methods.

You have the opportunity to upload content similar to “Construction Of Two Feet Electronics Fluorescent Lamp” and receive payment for each download of the material. Engage in a conversation with our representative if you have any Project topics related to Construction Of Two Feet Electronics Fluorescent Lamp.