Design And Construction Electric Kettle With Control Switch
INSTRUCTIONS:
- You are perusing the project material titled “Design And Construction Electric Kettle With Control Switch.”
- The project material on Design And Construction Electric Kettle With Control Switch is available for instant download.
- Preview Chapter One of Design And Construction Electric Kettle With Control Switch at no cost.
- To access the complete project material for Design And Construction Electric Kettle With Control Switch, kindly make a donation to support the ongoing maintenance and operation of this website.
- The provided work on Design And Construction Electric Kettle With Control Switch is intended solely for academic research purposes and should be utilized strictly as a set of guidelines.
- Our objective in distributing Design And Construction Electric Kettle With Control Switch is to aid individuals unfamiliar with project research, specifically writers seeking assistance in this area.
- Kindly refrain from directly replicating the content provided in Design And Construction Electric Kettle With Control Switch materials.
- Feel free to reference “Design And Construction Electric Kettle With Control Switch” in your work, provided that you paraphrase appropriately.
- Unauthorized reproduction of Design And Construction Electric Kettle With Control Switch content is prohibited under our Terms of Use.
- UniProjects assumes no responsibility if you replicate the content of this Design And Construction Electric Kettle With Control Switch.
ABSTRACT
This project is titled the design and construction of an Electric Kettle with control kettle. It is designed to meet up with the safety and accuracy demand of electric kettle usage in industries and homes in the absence of the user or operator.
It is designed to control the temperature of the electric kettle to a variable range (0°C -100°C) which must be set by the user or operator. And this can be achieved by the use of temperature sensor known as THERMISTOR which functions as a control switch. This thermistor is a temperature control device with a high or low resistance value which can go high or low when the temperature is increased or reduced depending on the type.
 In this project, 100°C is used as a set temperature. And this device is design in such a way that when the temperature of the liquid inside the kettle is reached, the heater of the device will automatically switched-off and will maintain the off stage until when the temperature the liquid is dropped 97°C, and then it will switch-ON again in other to maintain that 100°C. And this automatic feature is controlled by a high current relay.
TABLE OF CONTENT
Title Page
Approval Page
Dedication
Acknowledgement
Abstract
Table of Content
CHAPTER ONE
1.0Â Â Â Â Introduction
1.1Â Â Â Â Block Diagram of the Electric Kettle with control switch
1.2Â Â Â Â Control System
1.3Â Â Â Â Circuit Diagram of the System
CHAPTER TWO
2.0    Major Component’s Description
2.1Â Â Â Â Resistors
2.2Â Â Â Â Diodes
2.3Â Â Â Â Capacitors
2.4Â Â Â Â Transformers
2.5Â Â Â Â Transistor
2.6Â Â Â Â Integrated Circuit
2.7Â Â Â Â Thermistor
CHAPTER THREE
3.0Â Â Â Â Sectional Description of the System
3.1Â Â Â Â Comparator Section
3.2Â Â Â Â Switching (relay) Section
3.3Â Â Â Â Power supply
3.4Â Â Â Â Sensor
3.5Â Â Â circuit operation
CHAPTER FOUR
4.0Â Â Â Â Construction Procedure and Testing
4.1Â Â Â Â Casing and Packaging
4.2Â Â Â Â Assembling of Sections
4.3Â Â Â Â Testing of System Operation
CHAPTER FIVE
5.0Â Â Â Â Installation of the Completed System
5.1Â Â Â Â Problem Encountered
5.2Â Â Â Â Cost Analysis
CHAPTER SIX
6.0Â Â Â Â Conclusion
6.1Â Â Â Â Recommendation
6.2Â Â Â Â Bibliography
CHAPTER ONE
1.0Â Â Â Â INTRODUCTION
The idea behind the design and construction of this system is to make available or alternative means providing safety and accuracy demand for Electric Kettle users for household or industrial purpose. This goes a long way in helping to curb the problem frequently encountered as a result of fire out break and inaccuracy found in measuring and maintaining temperature. That not with standing it makes it possible to have other means of boiling our liquid without constant temperature monitoring until when the required temperature will be achieved. Thereby creating time for the operator to be engaged on other works while the system is in operation.
Moreover, rate of fire accident cause by heating appliances in this country is high. So there is every need that other means of safety should be made available for constant running of our electric equipments and gadgets and also to provide comfort to man. Hence, with the help of a Thermistor Controlled Electric kettle, which has come to solve the problem of fire accident and inaccuracy found in temperature measurement in Nigeria, a steady running and operation of our electric equipments and gadgets is guaranteed.
1.1Â Â Â BLOCK DIAGRAM OF TEMPERATURE CONTROL ELECTRIC KETTLE.
The block diagram is as below:
POWER SUPPLY UNITÂ Â Â Â Â Â Â Â COMPACTOR UNITÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â TWITCHING UNIT
SENSOR
1.3Â Â Â Â CONTROL SYSTEM
The Temperature control switch system was built to control the temperature of an electric kettle to a specific temperature range with help of a voltage comparator IC.
This system also consists of three stages, that is, power supply stage, comparator and switching stage. This three stages work together in other to give out a specific output –control temperature.
In the power supply unit, 12V supply was used and an integrated circuit, IC, which is capable of comparing two different voltages, while at the switching unit a  relay with a high current is used. This is well explained in detail in chapter three below.
When this system is powered from the 12v DC supply, the comparator will be powered which was configured to generate a current that will be able to drive the relay which is the switching circuit that triggers the kettle.
If you’re referencing specific information, quotes, or ideas from “Design And Construction Electric Kettle With Control Switch”, provide a citation in the appropriate format such as APA, MLA, or Chicago.
The title page of downloaded document contains information about the author, editor, and publisher of Design And Construction Electric Kettle With Control Switch material.
Select “Donate & Download,” on top of “Design And Construction Electric Kettle With Control Switch” and upon completing your donation, you will be directed to the download page or you can chat with us for alternative donation methods.
You have the opportunity to upload content similar to “Design And Construction Electric Kettle With Control Switch” and receive payment for each download of the material. Engage in a conversation with our representative if you have any topics related to Design And Construction Electric Kettle With Control Switch.