Design And Construction Of Led Display System

ABSTRACT

This project work is on an “LED DISPLAY SYSTEM” which is an electronic display used in advertising and distribution of information in public and private locations. The displays are seen mainly in many public places such as airports, train stations, and shopping malls. In this work, signs uses technology such as LED to display information and can be found in public spaces, transportation systems, museums, stadiums, retail stores, hotels, restaurants, and corporate buildings.

TABLE OF CONTENTS

COVER PAGE

TITLE PAGE

APPROVAL PAGE

DEDICATION

ACKNOWELDGEMENT

ABSTRACT

CHAPTER ONE

INTRODUCTION

1.1      BACKGROUND OF THE PROJECT

• PROBLEM STATEMENT
• AIM OF THE PROJECT
• OBJECTIVE OF THE PROJECT
• PURPOSE OF THE PROJECT
• LIMITATION OF THE PROJECT
• ADVANTAGES OF THE PROJECT
• PROBLEM OF THE PROJECT
• APPLICATION OF THE PROJECT
• METHODOLOGY
• PROJECT ORGANISATION

CHAPTER TWO

LITERATURE REVIEW

• HISTORICAL BACKGROUND OF LIGHT EMITTING DIODE
• REVIEW OF COMMERCIAL DEVELOPMENT OF AN LED
• REVIEW OF ELECTRONICS SIGN BOARD
• HISTORICAL BACKGROUND OF ELECTRONICS SIGN BOARD

CHAPTER THREE

METHODOLOGY

• SYSTEM CIRCUIT DIAGRAM
• CIRCUIT DESCRIPTION
• POWER SOURCE CONSIDERATIONS
• DESCRIPTION OF MAJOR COMPONENTS USED

CHAPTER FOUR

TESTING AND RESULTS

• CONSTRUCTION PROCEDURE AND TESTING
• INSTALLATION OF THE COMPLET DESIGN
• CASING AND PACKAGING
• ASSEMBLING OF SECTIONS
• TESTING OF SYSTEM OPERATION

CHAPTER FIVE

• CONCLUSION
• RECOMMENDATION
• REFERENCES

 

CHAPTER ONE

1.0                                                        INTRODUCTION

1.1                                           BACKGROUND OF THE STUDY

Notice board is a surface intended for the posting of public messages, for example, to advertise items wanted or for sale, announce events, or provide information. This notice board is made of a light emitting diode, or they can be placed on the road or public places so people can other people to read and see.

Light-emitting diode (LED) technology is frequently used in signs. This technology, first used primarily at sporting events, later appeared at businesses, churches, schools, and government buildings.

Signs frequently use lighting as a means of conveying their information. Light-emitting diode (LED) is highly use because it is way of way to increase visibility. LED fluoresces and scatters the light. The light transmission through the markers creates a bright and colorful display. LED’s commonly have a half-life (to 1/2 brightness) of 50,000 hours.

LED notice board features various flashing effects that are sure to attract the attention of passersby. The flashing pattern as well as the displayed colors can be cycled with these restaurant signs. These illuminated displays could be hung on any glass surface with the use of some simple suction cups. All of the LED writing boards sold here include wall screws and anchors as well as nylon rope to hang from the overhead. Use these flashing write-on signs as an advertising medium in a restaurant or nightclub. Bar owners choose these LED writing boards to announce live bands appearing throughout the week, or to list the featured drink specials. The framing on these advertising signs are solid metal with a black painted finish. The profile on these LED writing boards is one inch deep, thereby conforming to ADA requirements for items mounted on a wall. Choose one of these restaurants signs today for your café or coffee shop.

These LED sign board is the ideal neon board for growing revenue and customer base. This illuminated restaurant sign is a great way to customize advertising messages for your store, hotel, casino lounge or other business. These LED writing boards feature a clear acrylic covering that is easily cleaned. Use a wet-erase marker to create your own customized fluorescent board. This LED sign board, also known as an advertising signs, feature small lights running the perimeter of the black frame. When this illuminated signage is turned on, these lights make your graphics glow, as if under a black light. These LED writing boards also have the capability to be illuminated with no blinking lights. These illuminated menu signs will certainly attract attention of patrons. This LED sign board looks best in dimly lit settings such as bars, night clubs and restaurants. The lighting technology in these menu displays is quite advanced. This LED sign board feature bright, equally distributed lighting so that even the center of the unit is bright. There are no hot and cold spots on any of these restaurant menu displays. Additionally, with these LED writing boards there is never any need to worry about light bulbs being blown. The technology on these menu signs uses diodes as the primary source of light.

1.2                                                  PROBLEM STATEMENT

In the last time, information display boards are mostly paper-based before the invention of LED display board, and this has created inconvenience of showing the targeted people information during rainy days because the papers would be wet and wear out. Besides, it would be the possibility of the paper is not pasted on the board properly and dropped easily. After LED is introduced to the public, it is cleverly used to show information to public. However, again the problem arises when human resources, time and costs are wasted to change the information on display board placed at different locations one by one. Thus, this system is created to improvise the conventional method in such a way that the same messages can be sent to multiple LED display boards from one main system.

1.3                                              PURPOSE OF THE PROJECT

The main purpose of signboard is communication, to convey information such that its receiver can make cognitive decisions based on the information provided. In general, electronic sign board can be classified into the following functions:

(a). Information: signs giving information about services and facilities, e.g., maps, directories, instructions for use, etc.

(b)Direction: signs leading to services, facilities, functional spaces and key areas, e.g., sign posts, directional arrows, etc.

(c)Identification: signs indicating services and facilities, e.g., room names and numbers, toilet signs, number of floors, etc. (d)Safety and Regulatory: signs giving warning or safety instructions, e.g., warning signs, traffic signs, exit signs, rules and regulations.

1.4                                             OBJECTIVE OF THE PROJECT

This main objective of this work is to construct an electronics device that can be used to pass information to the public or passerby using light emitting diodes. This work displays “welcome to project office electrical/electronic engineering

1.5                                         SIGNIFICANCE OF THE PROJECT

The LED sign board is very slim and lightweight in design. LED light source, lower power consumption. Ultra slim and ultra light. Top designs for show window and guide board. This LED sign board is ideal for advertising or displaying purpose. The sign board allows you to display your advertising messages, product images at prominent places.

1.6                                      APPLICATIONS AND ADVANTAGES

This project can be used public places as well as hospitals and private companies, schools, colleges and universities.

Notice boards are particularly prevalent at universities, like this work is used to display “welcome to project office electrical/electronic engineering”. They are used by many sports groups and extracurricular groups and anything from local shops to official notices. Dormitory corridors, well-trafficked hallways, lobbies, and freestanding kiosks often have Notice boards attached to facilitate the posting of notices.

1.7                                           LIMITATION OF THE PROJECT

Presently almost all electronic notice boards are designed using wired system. One of the drawbacks of the design is the system is inflexible in term of placement, that is the information placed cannot changed easily and the wiring can be messy.

1.8                                         METHODOLOGY

To achieve the aim and objectives of this work, the following are the steps involved:

1. Study of the previous work on the project so as to improve it efficiency.
2. Draw a block diagram.

• Test for continuity of components and devices,

1. Design and calculation for the device was carried out.
2. Studying of various component used in circuit.
3. Construction of the circuit was carried out.

• Finally, the whole device was cased and final test was carried out.

1.9                                                         PROJECT ORGANISATION

The work is organized as follows: chapter one discuses the introductory part of the work,   chapter two presents the literature review of the study,  chapter three describes the methods applied,  chapter four discusses the results of the work, chapter five summarizes the research outcomes and the recommendations.