Fabrication Of A Foldable Camp Bed
INSTRUCTIONS:
- You are perusing the project material titled “Fabrication Of A Foldable Camp Bed.”
- The project material on Fabrication Of A Foldable Camp Bed is available for instant download.
- Preview Chapter One of Fabrication Of A Foldable Camp Bed at no cost.
- To access the complete project material for Fabrication Of A Foldable Camp Bed, kindly make a donation to support the ongoing maintenance and operation of this website.
- The provided work on Fabrication Of A Foldable Camp Bed is intended solely for academic research purposes and should be utilized strictly as a set of guidelines.
- Our objective in distributing Fabrication Of A Foldable Camp Bed is to aid individuals unfamiliar with project research, specifically writers seeking assistance in this area.
- Kindly refrain from directly replicating the content provided in Fabrication Of A Foldable Camp Bed materials.
- Feel free to reference “Fabrication Of A Foldable Camp Bed” in your work, provided that you paraphrase appropriately.
- Unauthorized reproduction of Fabrication Of A Foldable Camp Bed content is prohibited under our Terms of Use.
- UniProjects assumes no responsibility if you replicate the content of this Fabrication Of A Foldable Camp Bed.
In this project, three alternative design solutions were considered for the foldable cam – bed. The authors utilize the local materials (with cost consideration) for the components. The merits and demerits of each of the alternative with respect to the considered group were also discusses and the solutions of the alternatives that best satisfied the limitations were selected for production. The material selected design and cost analysis, production processes and operation maintenance and problems encountered during the design were also included.
Title page
Letter of Transmission
Release Page
Signature Page
Approval Page
Dedication
Acknowledgement
Abstract
Table of content
CHAPTER ONE
Introduction
Limitation of existing foldable camp – bed
Design specification of the foldable camp – bed
CHAPTER TWO
Literature Review
Component parts of the foldable camp – bed
The Angel Iron
The catcher
The cover
The brackets
The square pipe
CHAPTER THREE
Design solution
Alternative A
Merit
Demerit
Alternative B
Merit
Demerit
Alternative C
Merit demerits
CHAPTER FOUR
Material selection
Mild steel
Standard parts used
CHAPTER FIVE
Description of foldable camp – bed
CHAPTER SIX
Cost and design analysis
Stages of design process
Conceptual stage
Acceptance stage
Functional stage
Translation stage
Stage of production
Weldability
Impact resistance
Possible defects in the materials
Deterioration due to wear and corrosion
Defects on workmanship
Extent of use of a particular material
CHAPTER SEVEN
Construction
CHAPTER EIGHT
Economic Analysis
Material cost Analysis
Machine cost Analysis
Labour cost
CHAPTER NINE
Operation of the foldable camp – bed
The viability of the system
CHAPTER TEN
Conclusion
Recommendation
References
1.0 INTRODUCTION
Camp bed is used universally for relaxation, emergency eases such as war and in other several ways, it is the acknowledgement of these resources that led to the design of the foldable camp – bed. All the existing foldable camp bed, have almost the same dimension but differ in design. Some use rope and ailets while the modern design make use of wood and spring. Some other are constructed using straight bars, pipes of angle iron.
1.1 LIMITATION OF ALREADY EXISTING FOLDABLE CAMP – BED
Some foldable camp beds are made of Iron bars which are too heavy and cannot be carried with ease. Most existing foldable camp – bed are cumbersome to carry because their lengths which are normally six feet or 183 meters or 1830mm.
Some of the materials used for fabrication of the foldable camp bed may not be locally got and this affects its prince, making its availability to become more rare.
In the market, design that make use of springs to hold the improvised materials or even wood are found. But when the spring fill off, its efficiency is reduced and this make it more profitable to make use of wood than spring to hold improvised mattress.
DESIGN SPECIFICATION OF THE FOLDABLE CAMP BED
It is high in weight
It can be produced locally
It is portable
It has an in built head rest which is adjustable. The tarpaulin material used in folding the foam to the wood can be easily removed along with the wood for cleaning.
It is could carry a person up to 75kg in weight. Pipes (square) used are made of galvanized steel and also the angle Iron used is made if galvanized steel both painted with aluminum oil paint to avoid corrosion.
It is easy to manipulate.
All these specification put together make this project a viable one that can compete favorably with any existing foldable camp bed and also eliminate the limitations posses by earlier designers.
If you’re referencing specific information, quotes, or ideas from “Fabrication Of A Foldable Camp Bed”, provide a citation in the appropriate format such as APA, MLA, or Chicago.
The title page of downloaded document contains information about the author, editor, and publisher of Fabrication Of A Foldable Camp Bed Project material.
Select “Donate & Download,” on top of “Fabrication Of A Foldable Camp Bed” and upon completing your donation, you will be directed to the download page or you can chat with us for alternative donation methods.
You have the opportunity to upload content similar to “Fabrication Of A Foldable Camp Bed” and receive payment for each download of the material. Engage in a conversation with our representative if you have any Project topics related to Fabrication Of A Foldable Camp Bed.