List of CHEMICAL ENGINEERING Project Topics and Materials in PDF/DOC:
6 Chapters
|
67 Pages
|
9,246 Words
|
Project
This project is an equipment which been fabricated for the principle purpose of producing heat energy for commercial use by burning solid fuel like briquette. The project which is the fabrication of briquette stove was made from preferentially selected … Continue reading
5 Chapters
|
69 Pages
|
1,226 Words
|
Project
The effect of concentration of hydrochloric acid on hydrolysis of cellulose (saw- dust) to glucose was studied on this research project and the steps obtained to achieve this project involved treatment of saw-dust (cellulose) … Continue reading
8 Chapters
|
72 Pages
|
8,771 Words
|
Project
This research project is aimed at producing domestic powder and consequently, three different types of powder were produced, namely, simple face powder (pan-cake), medicated/Antiseptic powder (dristing powder). During the various production Talcum, Zinc … Continue reading
5 Chapters
|
47 Pages
|
6,048 Words
|
Project
A motorized mixer of 200 liters capacity was constructed to have the capability of mixing 200 liters of fluid during operation. The construction of the mixer involves the preliminary measures and calculations on the surface area of the metal s … Continue reading
ABSTRACTThis project is anchored on the design and construction of Tiles, windows and furniture involves in the conference room their method and pattern of construction, it’s advantages value and as well other valuable tool such as; working t … Continue reading
5 Chapters
|
52 Pages
|
1,709 Words
|
Project
This study was on oxidative stress status of rat fed with Pentraclethra macrophylla, otherwise known as African oil bean seed oil in English or Ugba in Igbo. Sixteen male rats were distributed into four groups. 1 (control), t … Continue reading
5 Chapters
|
79 Pages
|
1,499 Words
|
Project
This project work studied the refining of crude soya bean oil extracted from soya bean seed using alkali /caustic refining method. The work was carried out using phosphoric acid for the degumming /pretreatment process and sodium hydroxide for the neutraliza … Continue reading
5 Chapters
|
44 Pages
|
5,534 Words
|
Project
The Turbine Mixer was Fabricated at the Mechanical Engineering Workshop of Institute of Management and Technology, Enugu. The method of the fabrication of the turbine mixer involved a preliminary computation of the dimensions of the standard turbine in … Continue reading
ABSTRACTThe main purpose behind this project is “Drunk working detectionâ€. Now a days, many accidents are happening our factories because of the alcohol consumption of factory worker more especially engine/machine operators. Thus Drunk mach … Continue reading
7 Chapters
|
45 Pages
|
5,507 Words
|
Project
The aim of this project was to construct shell and tube heat exchanger with fixed boundless. A heat exchanger that would cool 5 x 5 x 10 – 3 kg/s of steam at a calculated heat load of 152 – 395/S was fabricated. The steam is to reach … Continue reading
6 Chapters
|
41 Pages
|
5,319 Words
|
Project
The aim of this project was to construct a steel cupboard in order to help us acquire the knowledge of fabrication of a modern cupboard and the essence of it. Also to enable us (the students of chemical Engineering) to know how to construct as future … Continue reading
5 Chapters
|
38 Pages
|
5,361 Words
|
Project
The repair of the fixed bed adsorption column, a product of arm field technical company was carried out for the purpose of bringing the faulty equipment back to its normal operating system. Before this exercise, the equipment was out of oper … Continue reading
3 Chapters
|
30 Pages
|
4,192 Words
|
Project
In the construct of 2,000 litres capacity water reservoir galvanized steel sheet forms the tank and an angle iron rod forms the stand. Two full length galvanized sheet were marked out and cut out to the required sizes. The work st … Continue reading
7 Chapters
|
61 Pages
|
8,223 Words
|
Project
The purpose of the project is to study the effect of liquid flow rate and gas flow rate on the pressure drop in a packed absorption tower and also to repair and restore the packed absorpt … Continue reading
5 Chapters
|
68 Pages
|
1,353 Words
|
Project
This study is a comparative analysis of the use of coal, fuel oil and natural gas for cement production noting their physical and chemical properties, cost and availability, impact on the environment and hum … Continue reading
5 Chapters
|
75 Pages
|
1,620 Words
|
Project
The purpose of this work was to study the effect of chemical surface properties of activated carbons for their use in water purification. To achieve this objective, activated carbon … Continue reading
5 Chapters
|
42 Pages
|
5,505 Words
|
Project
Cooker plays an integral role in oil and gas well pads. They generate the heat necessary for separating the oil, gas and water mixture and to keep the gases in their vapor phase during transportation through pipelines. Industrial co … Continue reading
ABSTRACTA study was conducted to investigate the relationship between temperature (20 oC to 100 oC) on the viscosities palm kernel oil, a-z oil, red oil and water. The viscosities of this different vegetable oil and water were determined using … Continue reading
5 Chapters
|
59 Pages
|
2,399 Words
|
Project
This research project studied on the kinetics of hydrolysis of cellulose to glucose. The steps employed to achieve this project involved extraction of cellulose from sawdust and subsequently, hydrolysis of starch to simple sugar. Thi … Continue reading
5 Chapters
|
30 Pages
|
3,758 Words
|
Project
Stop clocks are devices for indicating time duration for the occurrence of two events after a passage of time. They are usually powered by batteries and they measure time in unit of seconds. Most clocks stop working as a result of the inability of the main spri … Continue reading
5 Chapters
|
89 Pages
|
1,072 Words
|
Project
Inflammation is a complex biological response of vascular tissue to harmful stimuli such as pathogen, damage cells or irritants. The urgency generated by in increased rate of stroke, … Continue reading
5 Chapters
|
56 Pages
|
777 Words
|
Project
This work was carried out to investigate the effects of pterocarpus mildbreadii seed on the HDL- level of albino rats.High density lipoprotein(HDL) is a fraction of cholesterol,which helps to transport ch … Continue reading
7 Chapters
|
47 Pages
|
5,369 Words
|
Project
The production and analysis of “Ngu†extract for temperature and water requirement for leaching of casuistic alkali is the basic objective of this project. The production was carried out by using unit oper … Continue reading
5 Chapters
|
50 Pages
|
7,347 Words
|
Project
The refurbishment of the fluid flow demonstration unit was carried out in the Chemical Engineering pilot plant laboratory of the Institute of Management and Technology Enugu. The refurbishment process was carried out to ensure adequate f … Continue reading