List of INDUSTRIAL CHEMISTRY Project Topics and Materials in PDF/DOC:
5 Chapters
|
47 Pages
|
6,048 Words
|
Project
A motorized mixer of 200 liters capacity was constructed to have the capability of mixing 200 liters of fluid during operation. The construction of the mixer involves the preliminary measures and calculations on the surface area of the metal s … Continue reading
6 Chapters
|
69 Pages
|
1,968 Words
|
Project
Perfume extraction refers to the extraction of aromatic compounds from raw materials, using methods such as distillation, solvent extraction, expression or enfleurage. The extracts are either essential oils, absolutes, con … Continue reading
ABSTRACTA study was conducted to investigate the relationship between temperature (20 oC to 100 oC) on the viscosities palm kernel oil, a-z oil, red oil and water. The viscosities of this different vegetable oil and water … Continue reading
6 Chapters
|
55 Pages
|
5,756 Words
|
Project
The fresh cassava were sources from Idodo in Nkanu Local Government of Enugu state. The weight of the cassava tuber were taken to be 31.50kg. After peeling and washing, it was divided into two equal parts which was 21.13kg for production of sample A … Continue reading
7 Chapters
|
72 Pages
|
9,930 Words
|
Project
A workshop cupboard is a facility designed from mild steel for the storage of various materials, like book material and non-book materials e.g. workshop tools, labouratory wares and reagents, etc; after operations in a chemical labouratory, mechanical … Continue reading
4 Chapters
|
40 Pages
|
5,382 Words
|
Project
The hydrocyclone is a separating device used for the separation of dust particles from air, which has no moving component parts. This mechanism can also be defined as a system of winds circulating about a center of relatively low barometric pressure a … Continue reading
5 Chapters
|
56 Pages
|
777 Words
|
Project
This work was carried out to investigate the effects of pterocarpus mildbreadii seed on the HDL- level of albino rats.High density lipoprotein(HDL) is a fraction of cholesterol,which helps to transport ch … Continue reading
5 Chapters
|
75 Pages
|
1,620 Words
|
Project
The purpose of this work was to study the effect of chemical surface properties of activated carbons for their use in water purification. To achieve this objective, activated carbon … Continue reading
5 Chapters
|
91 Pages
|
1,795 Words
|
Project
The research project studies the analysis of pear and its oil. The mesocarp from edible African pear “DacryodesEdulis†were evaluated for their oil yield. The pulp from this pear were oven dried at 100oC-105oC to a moisture content level of 29%. … Continue reading
4 Chapters
|
56 Pages
|
6,588 Words
|
Project
This project (Construction Of A Simple Size Reduction Machine) It was constructed locally with the use of local materials and tools in I.M.T mechanical Engineering workshop. The various parts of the equipment were constructed separatel … Continue reading
4 Chapters
|
87 Pages
|
11,851 Words
|
Project
The project Analysis of Enugu Coal was done to determine the characteristic properties of Enugu Coal with particular emphasis on the proximate and ultimate analysis. Coal samples from the Enugu Coal (Onyeama) mine were obtained and pulverized. The coal sample … Continue reading
5 Chapters
|
79 Pages
|
10,261 Words
|
Project
This projects is aimed at knowing the process and quality factor in Laundary and Toilet Soap Projection. Various factors affected the quality of the soap produced. These include the method used in production, types a … Continue reading
5 Chapters
|
54 Pages
|
5,438 Words
|
Project
This research work examined the impact of radio on voters mobilization with Enugu North municipality as a case study. The survey method was used for the study, this method was done to ena … Continue reading
8 Chapters
|
72 Pages
|
8,771 Words
|
Project
This research project is aimed at producing domestic powder and consequently, three different types of powder were produced, namely, simple face powder (pan-cake), medicated/Antiseptic powder (dristing powder). During the various production Talcum, Zinc … Continue reading
5 Chapters
|
65 Pages
|
1,750 Words
|
Project
This study was carried out to generate a design data, design and fabricate a maize corn-on-cob tray dryer used by maize farmers. Ripped maize corns with husks were bought from the market and preserved to retained its moisture co … Continue reading
3 Chapters
|
30 Pages
|
4,192 Words
|
Project
In the construct of 2,000 litres capacity water reservoir galvanized steel sheet forms the tank and an angle iron rod forms the stand. Two full length galvanized sheet were marked out and cut out to the required sizes. The work st … Continue reading
TABLE OF CONTENTDECLARATIONÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â … Continue reading
6 Chapters
|
100 Pages
|
13,257 Words
|
Project
This project “The Production of Ceiling Board from Local Raw Materials†was carried out basically using raw materials which was sourced locally. These raw materials are found to be very much in abundance. Some are materials sour … Continue reading
8 Chapters
|
80 Pages
|
10,247 Words
|
Project
Interface on petroleum product in multi-purpose pipeline system refers to as the zone of demarcation between two products where mixing occurs. Generally, interface is a boundary layer, so the bo … Continue reading
5 Chapters
|
81 Pages
|
1,336 Words
|
Project
This study evaluated "the effects of processing methods on the physico- chemical properties of sweet potato and sorghum flour". Sweet potato (Ipomoea batatas) is an important food cro … Continue reading
5 Chapters
|
99 Pages
|
12,520 Words
|
Project
This research project was carried out principally for the production of liquid and vapourized perfumes from local raw materials. The local raw material were subjected to various processing conditions in order to obtain purified perfume. Th … Continue reading
5 Chapters
|
78 Pages
|
9,099 Words
|
Project
This project was Carrie lent using sub-bituminous coal and crude palm oil. The degree of bleaching of the palm oil was monitored with a spectorphoto meter. The coal was collected in a lump from the mine. It air-chiecl to removed t … Continue reading
5 Chapters
|
92 Pages
|
10,764 Words
|
Project
The experiment was carried out to analyze comparatively coal and coconut activated carbon. The coal sample used in bituminous and with density of 1300kg 1m3 tile coconut shell was used. The coal and coconut shell was first ac … Continue reading
5 Chapters
|
60 Pages
|
17,080 Words
|
Project
The project dealt on the production of yam flour from yam chips. The yams were peeled and washed, 100grams samples coded sample A to G were subjected to two different drying conditions. Some were dried using the sun drying method while the others were dried t … Continue reading
5 Chapters
|
59 Pages
|
7,188 Words
|
Project
The construction of the five (5) litre Electric Kettle was carried out in mechanical workshop of the Institute of Management and Technology Enugu. (I.M.T). The fabrication process, included measuring and marking out operations of which the fo … Continue reading