List of INDUSTRIAL CHEMISTRY Project Topics and Materials in PDF/DOC:
5 Chapters
|
31 Pages
|
3,458 Words
|
Project
This report aimed at determining the presence and removal of mercaptan sulphur in kerosene using colour indicator method. It is known that impurities such as free sulphur, sulphur dioxide, marketers, finding materials etc. are found in petroleum products. C … Continue reading
ABSTRACTA study was conducted to investigate the relationship between temperature (20 oC to 100 oC) on the viscosities palm kernel oil, a-z oil, red oil and water. The viscosities of this different vegetable oil and water … Continue reading
6 Chapters
|
34 Pages
|
3,932 Words
|
Project
This project is a fabrication of a standard drawing writing desk using the cheapest, effective and most readily available materials. Method of maintenance and services were also taken into consideration. The functional aspect of the equipment … Continue reading
5 Chapters
|
80 Pages
|
9,919 Words
|
Project
This project “Extraction of oil from a local seed (groundnut oil) and Characterization†was carried out using ten cups of groundnut seeds that was purchased from a local market in Enugu metropolis. The oil these s … Continue reading
5 Chapters
|
53 Pages
|
1,440 Words
|
Project
This project was done to extract and characterize bean oil according to their particle sizes. The experiment was carried out using scent bean (i.e. ‘Ozaki’, ‘Ijilizi’or ‘Azamu’) as sample. The oils were ext … Continue reading
7 Chapters
|
84 Pages
|
10,735 Words
|
Project
This project work is on the bleaching of palm oil using activated charcoal. The charcoal used for this work was made from pieces of animal bone by carbonization method. It was then activated into two different samples. Firstly, the basi … Continue reading
5 Chapters
|
74 Pages
|
12,475 Words
|
Project
The table constructed has a horizontal top with vertical support or legs to raise it from the ground. The aim of the table constructed is for the preservation and storage of useful materials like books, files, computers, result booklets, el … Continue reading
6 Chapters
|
55 Pages
|
5,756 Words
|
Project
The fresh cassava were sources from Idodo in Nkanu Local Government of Enugu state. The weight of the cassava tuber were taken to be 31.50kg. After peeling and washing, it was divided into two equal parts which was 21.13kg for production of sample A … Continue reading
5 Chapters
|
68 Pages
|
1,353 Words
|
Project
This study is a comparative analysis of the use of coal, fuel oil and natural gas for cement production noting their physical and chemical properties, cost and availability, impact on the environment and hum … Continue reading
5 Chapters
|
75 Pages
|
9,653 Words
|
Project
The production of high quality foam was carried. The actualization of the production of polyurethane (fibre) foam was made possible by using the components / chemical raw materials such as polyol (polyurethes resin). TDI (toluene di-Iso-cyanate, methy … Continue reading
5 Chapters
|
62 Pages
|
9,453 Words
|
Project
The aim of this project was to construct one office table and four chairs. In the course of this project the length of plank used was 12†and we used about 4 number (mahogany) of 1†thickness, ¾ plywood of 1 sheet of 1†thickness, as we … Continue reading
6 Chapters
|
100 Pages
|
13,257 Words
|
Project
This project “The Production of Ceiling Board from Local Raw Materials†was carried out basically using raw materials which was sourced locally. These raw materials are found to be very much in abundance. Some are materials sour … Continue reading
6 Chapters
|
94 Pages
|
11,492 Words
|
Project
The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials … Continue reading
7 Chapters
|
65 Pages
|
8,952 Words
|
Project
In this research project, the various nail were subjected to six environments so as to check the effect of the environments on corrosion of the nails. Two sets of nails were used; normal nail and concrete nail. Six of each type while the other not … Continue reading
3 Chapters
|
30 Pages
|
4,192 Words
|
Project
In the construct of 2,000 litres capacity water reservoir galvanized steel sheet forms the tank and an angle iron rod forms the stand. Two full length galvanized sheet were marked out and cut out to the required sizes. The work st … Continue reading
5 Chapters
|
59 Pages
|
7,188 Words
|
Project
The construction of the five (5) litre Electric Kettle was carried out in mechanical workshop of the Institute of Management and Technology Enugu. (I.M.T). The fabrication process, included measuring and marking out operations of which the fo … Continue reading
TABLE OF CONTENTDECLARATIONÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â … Continue reading
5 Chapters
|
83 Pages
|
12,030 Words
|
Project
This project was carried out using acid activated coal from Enugu coal and the production of ve4getablew oil was monitored using spectrophotometer to measure the absorbance. It was also perform to check the suitability of activated Enugu coa … Continue reading
5 Chapters
|
26 Pages
|
2,877 Words
|
Project
The design and construction of s refrigerating unit is handled from the knowledge of the working principles of laws of thermodynamics. The size of the containing vessel i.e the case as established to be of 45cm by 32 cm in dimension. T … Continue reading
7 Chapters
|
61 Pages
|
8,223 Words
|
Project
The purpose of the project is to study the effect of liquid flow rate and gas flow rate on the pressure drop in a packed absorption tower and also to repair and restore the packed absorpt … Continue reading
7 Chapters
|
34 Pages
|
3,433 Words
|
Project
This project which is on the design and fabrication of a two face gas burner is a brief exploration on the various ways and means of designing, construction, operating the two face gas burner, putting cost into consideration for economic advantage … Continue reading
5 Chapters
|
92 Pages
|
10,764 Words
|
Project
The experiment was carried out to analyze comparatively coal and coconut activated carbon. The coal sample used in bituminous and with density of 1300kg 1m3 tile coconut shell was used. The coal and coconut shell was first ac … Continue reading
5 Chapters
|
47 Pages
|
5,529 Words
|
Project
INTRODUCTION Until recently, paint production was regarded as art, and use was made of it principally for decorative purposes. The production then was by trial and error with no standard principle and little or no regard … Continue reading
7 Chapters
|
48 Pages
|
5,774 Words
|
Project
The project title “fabrication of flow nozzle†was done by a selected group of ND II Chemical Engineering Students and the practiced objective (aim) of the project was centered on constructing a nozzle that is capable of transporting fluid from one to … Continue reading
6 Chapters
|
54 Pages
|
6,731 Words
|
Project
The fabrication of a set of sieves and shaker was carried out in paliton workshop, Enugu. After a thorough analysis on the suitable materials to be used in fabrication, galvanized steel was chosen due to its advantages over materials of fabr … Continue reading